The ngx_event_pipe() function wasn't called on write events with
wev->delayed set. As a result, threaded writing results weren't
properly collected in ngx_event_pipe_write_to_downstream() when a
write event was triggered for a completed write.
Further, this wasn't detected, as p->aio was reset by a thread completion
handler, and results were later collected in ngx_event_pipe_read_upstream()
instead of scheduling a new write of additional data. If this happened
on the last reading from an upstream, last part of the response was never
written to the cache file.
Similar problems might also happen in case of timeouts when writing to
client, as this also results in ngx_event_pipe() not being called on write
events. In this scenario socket leaks were observed.
Fix is to check if p->writing is set in ngx_event_pipe_read_upstream(), and
therefore collect results of previous write operations in case of read events
as well, similar to how we do so in ngx_event_pipe_write_downstream().
This is enough to fix the wev->delayed case. Additionally, we now call
ngx_event_pipe() from ngx_http_upstream_process_request() if there are
uncollected write operations (p->writing and !p->aio). This also fixes
the wev->timedout case.
The ngx_chain_coalesce_file() function may produce more bytes to send then
requested in the limit passed, as it aligns the last file position
to send to memory page boundary. As a result, (limit - send) may become
negative. This resulted in big positive number when converted to size_t
while calling ngx_output_chain_to_iovec().
Another part of the problem is in ngx_chain_coalesce_file(): it changes cl
to the next chain link even if the current buffer is only partially sent
due to limit.
Therefore, if a file buffer was not expected to be fully sent due to limit,
and was followed by a memory buffer, nginx called sendfile() with a part
of the file buffer, and the memory buffer in trailer. If there were enough
room in the socket buffer, this resulted in a part of the file buffer being
skipped, and corresponding part of the memory buffer sent instead.
The bug was introduced in 8e903522c17a (1.7.8). Configurations affected
are ones using limits, that is, limit_rate and/or sendfile_max_chunk, and
memory buffers after file ones (may happen when using subrequests or
with proxying with disk buffering).
Fix is to explicitly check if (send < limit) before constructing trailer
with ngx_output_chain_to_iovec(). Additionally, ngx_chain_coalesce_file()
was modified to preserve unfinished file buffers in cl.
A bug was introduced by 82efcedb310b that could lead to timing out of
responses or segmentation fault, when accept_mutex was enabled.
The output queue in HTTP/2 can contain frames from different streams.
When the queue is sent, all related write handlers need to be called.
In order to do so, the streams were added to the h2c->posted queue
after handling sent frames. Then this queue was processed in
ngx_http_v2_write_handler().
If accept_mutex is enabled, the event's "ready" flag is set but its
handler is not called immediately. Instead, the event is added to
the ngx_posted_events queue. At the same time in this queue can be
events from upstream connections. Such events can result in sending
output queue before ngx_http_v2_write_handler() is triggered. And
at the time ngx_http_v2_write_handler() is called, the output queue
can be already empty with some streams added to h2c->posted.
But after 82efcedb310b, these streams weren't processed if all frames
have already been sent and the output queue was empty. This might lead
to a situation when a number of streams were get stuck in h2c->posted
queue for a long time. Eventually these streams might get closed by
the send timeout.
In the worst case this might also lead to a segmentation fault, if
already freed stream was left in the h2c->posted queue. This could
happen if one of the streams was terminated but wasn't closed, due to
the HEADERS frame or a partially sent DATA frame left in the output
queue. If this happened the ngx_http_v2_filter_cleanup() handler
removed the stream from the h2c->waiting or h2c->posted queue on
termination stage, before the frame has been sent, and the stream
was again added to the h2c->posted queue after the frame was sent.
In order to fix all these problems and simplify the code, write
events of fake stream connections are now added to ngx_posted_events
instead of using a custom h2c->posted queue.
Previously, a request body bigger than "client_body_buffer_size" wasn't written
into a temporary file if it has been pre-read entirely. The preread buffer
is freed after processing, thus subsequent use of it might result in sending
corrupted body or cause a segfault.
Previously, while shutting down gracefully, the HTTP/2 connections were
closed in transition to idle state after all active streams have been
processed. That might never happen if the client continued opening new
streams.
Now, nginx sends GOAWAY to all HTTP/2 connections and ignores further
attempts to open new streams. A worker process will quit as soon as
processing of already opened streams is finished.
When the last_buf flag is cleared for add_after_body to append more data from a
subrequest, other filters may still have buffered data, which should be flushed
at this point. For example, the sub_filter may have a partial match buffered,
which will only be flushed after the subrequest is done, ending up with
interleaved data in output.
Setting last_in_chain instead of last_buf flushes the data and fixes the order
of output buffers.
This fixes a problem with aio threads and sendfile with aio_write switched
off, as observed with range requests after fc72784b1f52 (1.9.13). Potential
problems with sendfile in threads were previously described in 9fd738b85fad,
and this seems to be one of them.
The problem occurred as file's thread_handler was set to NULL by event pipe
code after a sendfile thread task was scheduled. As a result, no sendfile
completion code was executed, and the same buffer was additionally sent
using non-threaded sendfile. Fix is to avoid modifying file's thread_handler
if aio_write is switched off.
Note that with "aio_write on" it is still possible that sendfile will use
thread_handler as set by event pipe. This is believed to be safe though,
as handlers used are compatible.
Return 1 in the SSL_CTX_set_tlsext_ticket_key_cb() callback function
to indicate that a new session ticket is created, as per documentation.
Until 1.1.0, OpenSSL didn't make a distinction between non-negative
return values.
See https://git.openssl.org/?p=openssl.git;a=commitdiff;h=5c753de for details.
It fixes potential connection leak if some unsent data was left in the SSL
buffer. Particularly, that could happen when a client canceled the stream
after the HEADERS frame has already been created. In this case no other
frames might be produced and the HEADERS frame alone didn't flush the buffer.
Checking for return value of c->send_chain() isn't sufficient since there
are data can be left in the SSL buffer. Now the wew->ready flag is used
instead.
In particular, this fixed a connection leak in cases when all streams were
closed, but there's still some data to be sent in the SSL buffer and the
client forgot about the connection.
Particularly this fixes alerts on OS X and NetBSD systems when HTTP/2 is
configured over plain TCP sockets.
On these systems calling writev() with no data leads to EINVAL errors
being logged as "writev() failed (22: Invalid argument) while processing
HTTP/2 connection".
Previously, if the worker process exited, GOAWAY was sent to connections in
idle state, but connections with active streams were closed without GOAWAY.
Previously, when a buffer was processed by the sub filter, its final bytes
could be buffered by the filter even if they don't match any pattern.
This happened because the Boyer-Moore algorithm, employed by the sub filter
since b9447fc457b4 (1.9.4), matches the last characters of patterns prior to
checking other characters. If the last character is out of scope, initial
bytes of a potential match are buffered until the last character is available.
Now, after receiving a flush or recycled buffer, the filter performs
additional checks to reduce the number of buffered bytes. The potential match
is checked against the initial parts of all patterns. Non-matching bytes are
not buffered. This improves processing of a chunked response from upstream
by sending the entire chunks without buffering unless a partial match is found
at the end of a chunk.
When the stream is terminated the HEADERS frame can still wait in the output
queue. This frame can't be removed and must be sent to the client anyway,
since HTTP/2 uses stateful compression for headers. So in order to postpone
closing and freeing memory of such stream the special close stream handler
is set to the write event. After the HEADERS frame is sent the write event
is called and the stream will be finally closed.
Some events like receiving a RST_STREAM can trigger the read handler of such
stream in closing state and cause unexpected processing that can result in
another attempt to finalize the request. To prevent it the read handler is
now set to ngx_http_empty_handler.
Thanks to Amazon.
There is no reason to add the "Content-Length: 0" header to a proxied request
without body if the header isn't presented in the original request.
Thanks to Amazon.
According to RFC 7540, an endpoint should not send more than one RST_STREAM
frame for any stream.
Also, now all the data frames will be skipped while termination.
The ngx_http_v2_finalize_connection() closes current stream, but that is an
invalid operation while processing unbuffered upload. This results in access
to already freed memory, since the upstream module sets a cleanup handler that
also finalizes the request.
Previously, the stream's window was kept zero in order to prevent a client
from sending the request body before it was requested (see 887cca40ba6a for
details). Until such initial window was acknowledged all requests with
data were rejected (see 0aa07850922f for details).
That approach revealed a number of problems:
1. Some clients (notably MS IE/Edge, Safari, iOS applications) show an error
or even crash if a stream is rejected;
2. This requires at least one RTT for every request with body before the
client receives window update and able to send data.
To overcome these problems the new directive "http2_body_preread_size" is
introduced. It sets the initial window and configures a special per stream
preread buffer that is used to save all incoming data before the body is
requested and processed.
If the directive's value is lower than the default initial window (65535),
as previously, all streams with data will be rejected until the new window
is acknowledged. Otherwise, no special processing is used and all requests
with data are welcome right from the connection start.
The default value is chosen to be 64k, which is bigger than the default
initial window. Setting it to zero is fully complaint to the previous
behavior.
Since 4fbef397c753 nginx rejects with the 400 error any attempts of
requesting different host over the same connection, if the relevant
virtual server requires verification of a client certificate.
While requesting hosts other than negotiated isn't something legal
in HTTP/1.x, the HTTP/2 specification explicitly permits such requests
for connection reuse and has introduced a special response code 421.
According to RFC 7540 Section 9.1.2 this code can be sent by a server
that is not configured to produce responses for the combination of
scheme and authority that are included in the request URI. And the
client may retry the request over a different connection.
Now this code is used for requests that aren't authorized in current
connection. After receiving the 421 response a client will be able
to open a new connection, provide the required certificate and retry
the request.
Unfortunately, not all clients currently are able to handle it well.
Notably Chrome just shows an error, while at least the latest version
of Firefox retries the request over a new connection.
A special last buffer with cl->buf->pos set to NULL can be present in
a chain when writing request body if chunked encoding was used. This
resulted in a NULL pointer dereference if it happened to be the only
buffer left after a do...while loop iteration in ngx_write_chain_to_file().
The problem originally appeared in nginx 1.3.9 with chunked encoding
support. Additionally, rev. 3832b608dc8d (nginx 1.9.13) changed the
minimum number of buffers to trigger this from IOV_MAX (typically 1024)
to NGX_IOVS_PREALLOCATE (typically 64).
Fix is to skip such buffers in ngx_chain_to_iovec(), much like it is
done in other places.
The WINDOW_UPDATE frame could be left in the output queue for an indefinite
period of time resulting in the request timeout.
This might happen if reading of the body was triggered by an event unrelated
to client connection, e.g. by the limit_req timer.
Particularly this prevents sending WINDOW_UPDATE with zero delta
which can result in PROTOCOL_ERROR.
Also removed surplus setting of no_flow_control to 0.
The ngx_thread_pool_done object isn't volatile, and at least some
compilers assume that it is permitted to reorder modifications of
volatile and non-volatile objects. Added appropriate ngx_memory_barrier()
calls to make sure all modifications will happen before the lock is released.
Reported by Mindaugas Rasiukevicius,
http://mailman.nginx.org/pipermail/nginx-devel/2016-April/008160.html.
