The check tested the total size of a packet header and unprotected packet
payload, which doesn't include the packet number length and expansion of
the packet protection AEAD. If the packet was corrupted, it could cause
false triggering of the condition due to unsigned type underflow leading
to a connection error.
Existing checks for the QUIC header and protected packet payload lengths
should be enough.
From quic-tls draft, section 5.4.2:
An endpoint MUST discard packets that are not long enough to contain
a complete sample.
The check includes the Packet Number field assumed to be 4 bytes long.
During long packet header parsing, pkt->len is updated with the Length
field value that is used to find next coalesced packets in a datagram.
For short packets it still contained the whole QUIC packet size.
This change uniforms packet length handling to always contain the total
length of the packet number and protected packet payload in pkt->len.
Previously STOP_SENDING was sent to client upon stream closure if rev->eof and
rev->error were not set. This was an indirect indication that no RESET_STREAM
or STREAM fin has arrived. But it is indeed possible that rev->eof is not set,
but STREAM fin has already been received, just not read out by the application.
In this case sending STOP_SENDING does not make sense and can be misleading for
some clients.
The peer may issue additional connection IDs up to the limit defined by
transport parameter "active_connection_id_limit", using NEW_CONNECTION_ID
frames, and retire such IDs using RETIRE_CONNECTION_ID frame.
It is required to distinguish internal errors from corrupted packets and
perform actions accordingly: drop the packet or close the connection.
While there, made processing of ngx_quic_decrypt() erorrs similar and
removed couple of protocol violation errors.
quic-transport
5.2:
Packets that are matched to an existing connection are discarded if
the packets are inconsistent with the state of that connection.
5.2.2:
Servers MUST drop incoming packets under all other circumstances.
The removal of QUIC packet protection depends on the largest packet number
received. When a garbage packet was received, the decoder still updated the
largest packet number from that packet. This could affect removing protection
from subsequent QUIC packets.
As per HTTP/3 draft 29, section 4.1:
When the server does not need to receive the remainder of the request,
it MAY abort reading the request stream, send a complete response, and
cleanly close the sending part of the stream.
On QUIC connections, SSL_shutdown() is used to call the send_alert callback
to send a CONNECTION_CLOSE frame. The reverse side is handled by other means.
At least BoringSSL doesn't differentiate whether this is a QUIC SSL method,
so waiting for the peer's close_notify alert should be explicitly disabled.
The logical quic connection state is tested by handler functions that
process corresponding types of packets (initial/handshake/application).
The packet is declined if state is incorrect.
No timeout is required for the input queue.
If a client attemtps to start a new connection with unsupported version,
a version negotiation packet is sent that contains a list of supported
versions (currently this is a single version, selected at compile time).
The function ngx_http_upstream_check_broken_connection() terminates the HTTP/1
request if client sends eof. For QUIC (including HTTP/3) the c->write->error
flag is now checked instead. This flag is set when the entire QUIC connection
is closed or STOP_SENDING was received from client.
Previously the request body DATA frame header was read by one byte because
filters were called only when the requested number of bytes were read. Now,
after 08ff2e10ae92 (1.19.2), filters are called after each read. More bytes
can be read at once, which simplifies and optimizes the code.
This also reduces diff with the default branch.
Previously, such packets weren't handled as the resulting zero remaining time
prevented setting the loss detection timer, which, instead, could be disarmed.
For implementation details, see quic-recovery draft 29, appendix A.10.
The PTO handler is split into separate PTO and loss detection handlers
that operate interchangeably depending on which timer should be set.
The present ngx_quic_lost_handler is now only used for packet loss detection.
It replaces ngx_quic_pto_handler if there are packets preceeding largest_ack.
Once there is no more such packets, ngx_quic_pto_handler is installed again.
Probes carry unacknowledged data previously sent in the oldest packet number,
one per each packet number space. That is, it could be up to two probes.
PTO backoff is now increased before scheduling next probes.
In particular, this prevents declaring packet number 0 as lost if
there aren't yet any acknowledgements in this packet number space.
For example, only Initial packets were acknowledged in handshake.
Previously a single STREAM frame was created for each buffer in stream output
chain which is wasteful with respect to memory. The following changes were
made in the stream send code:
- ngx_quic_stream_send_chain() no longer calls ngx_quic_stream_send() and got
a separate implementation that coalesces neighbouring buffers into a single
frame
- the new ngx_quic_stream_send_chain() respects the limit argument, which fixes
sendfile_max_chunk and limit_rate
- ngx_quic_stream_send() is reimplemented to call ngx_quic_stream_send_chain()
- stream frame size limit is moved out to a separate function
ngx_quic_max_stream_frame()
- flow control is moved out to a separate function ngx_quic_max_stream_flow()
- ngx_quic_stream_send_chain() is relocated next to ngx_quic_stream_send()
Reworked connections reuse, so closing connections is attempted in
advance, as long as number of free connections is less than 1/16 of
worker connections configured. This ensures that new connections can
be handled even if closing a reusable connection requires some time,
for example, for a lingering close (ticket #2017).
The 1/16 ratio is selected to be smaller than 1/8 used for disabling
accept when working with accept mutex, so nginx will try to balance
new connections to different workers first, and will start reusing
connections only if this won't help.
Previously, reusing connections happened silently and was only
visible in monitoring systems. This was shown to be not very user-friendly,
and administrators often didn't realize there were too few connections
available to withstand the load, and configured timeouts (keepalive_timeout
and http2_idle_timeout) were effectively reduced to keep things running.
To provide at least some information about this, a warning is now logged
(at most once per second, to avoid flooding the logs).
Sending shutdown when ngx_http_test_reading() detects the connection is
closed can result in "SSL_shutdown() failed (SSL: ... bad write retry)"
critical log messages if there are blocked writes.
Fix is to avoid sending shutdown via the c->ssl->no_send_shutdown flag,
similarly to how it is done in ngx_http_keepalive_handler() for kqueue
when pending EOF is detected.
Reported by Jan Prachař
(http://mailman.nginx.org/pipermail/nginx-devel/2018-December/011702.html).
Without the flag, SSL shutdown is attempted on such connections,
resulting in useless work and/or bogus "SSL_shutdown() failed
(SSL: ... bad write retry)" critical log messages if there are
blocked writes.
Previously, bidirectional shutdown never worked, due to two issues
in the code:
1. The code only tested SSL_ERROR_WANT_READ and SSL_ERROR_WANT_WRITE
when there was an error in the error queue, which cannot happen.
The bug was introduced in an attempt to fix unexpected error logging
as reported with OpenSSL 0.9.8g
(http://mailman.nginx.org/pipermail/nginx/2008-January/003084.html).
2. The code never called SSL_shutdown() for the second time to wait for
the peer's close_notify alert.
This change fixes both issues.
Note that after this change bidirectional shutdown is expected to work for
the first time, so c->ssl->no_wait_shutdown now makes a difference. This
is not a problem for HTTP code which always uses c->ssl->no_wait_shutdown,
but might be a problem for stream and mail code, as well as 3rd party
modules.
To minimize the effect of the change, the timeout, which was used to be 30
seconds and not configurable, though never actually used, is now set to
3 seconds. It is also expanded to apply to both SSL_ERROR_WANT_READ and
SSL_ERROR_WANT_WRITE, so timeout is properly set if writing to the socket
buffer is not possible.
If some additional data from a pipelined request happens to be
read into the body buffer, we copy it to r->header_in or allocate
an additional large client header buffer for it.
This ensures that copying won't write more than the buffer size
even if the buffer comes from hc->free and it is smaller than the large
client header buffer size in the virtual host configuration. This might
happen if size of large client header buffers is different in name-based
virtual hosts, similarly to the problem with number of buffers fixed
in 6926:e662cbf1b932.
