OPENSSL_config() deprecated in OpenSSL 1.1.0. Additionally,
SSL_library_init(), SSL_load_error_strings() and OpenSSL_add_all_algorithms()
are no longer available if OPENSSL_API_COMPAT is set to 0x10100000L.
The OPENSSL_init_ssl() function is now used instead with appropriate
arguments to trigger the same behaviour. The configure test changed to
use SSL_CTX_set_options().
Deinitialization now happens automatically in OPENSSL_cleanup() called
via atexit(3), so we no longer call EVP_cleanup() and ENGINE_cleanup()
directly.
LibreSSL defines OPENSSL_VERSION_NUMBER to 0x20000000L, but uses an old
API derived from OpenSSL at the time LibreSSL forked. As a result, every
version check we use to test for new API elements in newer OpenSSL versions
requires an explicit check for LibreSSL.
To reduce clutter, redefine OPENSSL_VERSION_NUMBER to 0x1000107fL if
LibreSSL is used. The same is done by FreeBSD port of LibreSSL.
Correct error code for NGX_EXDEV on Windows is ERROR_NOT_SAME_DEVICE,
"The system cannot move the file to a different disk drive".
Previously used ERROR_WRONG_DISK is about wrong diskette in the drive and
is not appropriate.
There is no real difference though, as MoveFile() is able to copy files
between disk drives, and will fail with ERROR_ACCESS_DENIED when asked
to copy directories. The ERROR_NOT_SAME_DEVICE error is only used
by MoveFileEx() when called without the MOVEFILE_COPY_ALLOWED flag.
On Windows there are two possible error codes which correspond to
the EEXIST error code: ERROR_FILE_EXISTS used by CreateFile(CREATE_NEW),
and ERROR_ALREADY_EXISTS used by CreateDirectory().
MoveFile() seems to use both: ERROR_ALREADY_EXISTS when moving within
one filesystem, and ERROR_FILE_EXISTS when copying a file to a different
drive.
By default, requests with non-idempotent methods (POST, LOCK, PATCH)
are no longer retried in case of errors if a request was already sent
to a backend. Previous behaviour can be restored by using
"proxy_next_upstream ... non_idempotent".
Much like normal connections, cached connections are now tested against
u->conf->next_upstream, and u->state->status is now always set.
This allows to disable additional tries even with upstream keepalive
by using "proxy_next_upstream off".
Fixes various aspects of --test-build-devpoll, --test-build-eventport, and
--test-build-epoll.
In particular, if --test-build-devpoll was used on Linux, then "devpoll"
event method would be preferred over "epoll". Also, wrong definitions of
event macros were chosen.
This fixes buffer over-read while using variables in the "proxy_pass",
"fastcgi_pass", "scgi_pass", and "uwsgi_pass" directives, where result
of string evaluation isn't null-terminated.
Found with MemorySanitizer.
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
On nginx reload or binary upgrade, an attempt is made to inherit listen sockets
from the previous configuration. Previously, no check for socket type was made
and the inherited socket could have the wrong type. On binary upgrade, socket
type was not detected at all. Wrong socket type could lead to errors on that
socket due to different logic and unsupported syscalls. For example, a UDP
socket, inherited as TCP, lead to the following error after arrival of a
datagram: "accept() failed (102: Operation not supported on socket)".
It allows to turn off accumulation of small pool allocations into a big
preallocated chunk of memory. This is useful for debugging memory access
with sanitizer, since such accumulation can cover buffer overruns from
being detected.
This structure cannot be allocated as a large block anyway, otherwise that will
result in infinite recursion, since each large allocation requires to allocate
another ngx_pool_large_t.
The room for the structure is guaranteed by the NGX_MIN_POOL_SIZE constant.
When a keys_zone is full then each next request to the cache is
penalized. That is, the cache has to evict older files to get a
slot from the keys_zone synchronously. The patch introduces new
behavior in this scenario. Manager will try to maintain available
free slots in the keys_zone by cleaning old files in the background.
The "aio_write" directive is introduced, which enables use of aio
for writing. Currently it is meaningful only with "aio threads".
Note that aio operations can be done by both event pipe and output
chain, so proper mapping between r->aio and p->aio is provided when
calling ngx_event_pipe() and in output filter.
In collaboration with Valentin Bartenev.
The ngx_thread_write_chain_to_file() function introduced, which
uses ngx_file_t thread_handler, thread_ctx and thread_task fields.
The task context structure (ngx_thread_file_ctx_t) is the same for
both reading and writing, and can be safely shared as long as
operations are serialized.
The task->handler field is now always set (and not only when task is
allocated), as the same task can be used with different handlers.
The thread_write flag is introduced in the ngx_temp_file_t structure
to explicitly enable use of ngx_thread_write_chain_to_file() in
ngx_write_chain_to_temp_file() when supported by caller.
In collaboration with Valentin Bartenev.
This simplifies the interface of the ngx_thread_read() function.
Additionally, most of the thread operations now explicitly set
file->thread_task, file->thread_handler and file->thread_ctx,
to facilitate use of thread operations in other places.
(Potential problems remain with sendfile in threads though - it uses
file->thread_handler as set in ngx_output_chain(), and it should not
be overwritten to an incompatible one.)
In collaboration with Valentin Bartenev.
If a write event happens after sendfile() but before we've got the
sendfile results in the main thread, this write event will be ignored.
And if no more events will happen, the connection will hang.
Removing the events works in the simple cases, but not always, as
in some cases events are added back by an unrelated code. E.g.,
the upstream module adds write event in the ngx_http_upstream_init()
to track client aborts.
Fix is to use wev->complete instead. It is now set to 0 before
a sendfile() task is posted, and it is set to 1 once a write event
happens. If on completion of the sendfile() task wev->complete is 1,
we know that an event happened while we were executing sendfile(), and
the socket is still ready for writing even if sendfile() did not sent
all the data or returned EAGAIN.
