Export ciphers are forbidden to negotiate in TLS 1.1 and later protocol modes.
They are disabled since OpenSSL 1.0.2g by default unless explicitly configured
with "enable-weak-ssl-ciphers", and completely removed in OpenSSL 1.1.0.
A new behaviour was introduced in OpenSSL 1.1.1e, when a peer does not send
close_notify before closing the connection. Previously, it was to return
SSL_ERROR_SYSCALL with errno 0, known since at least OpenSSL 0.9.7, and is
handled gracefully in nginx. Now it returns SSL_ERROR_SSL with a distinct
reason SSL_R_UNEXPECTED_EOF_WHILE_READING ("unexpected eof while reading").
This leads to critical errors seen in nginx within various routines such as
SSL_do_handshake(), SSL_read(), SSL_shutdown(). The behaviour was restored
in OpenSSL 1.1.1f, but presents in OpenSSL 3.0 by default.
Use of the SSL_OP_IGNORE_UNEXPECTED_EOF option added in OpenSSL 3.0 allows
to set a compatible behaviour to return SSL_ERROR_ZERO_RETURN:
https://git.openssl.org/?p=openssl.git;a=commitdiff;h=09b90e0
See for additional details: https://github.com/openssl/openssl/issues/11381
The OPENSSL_SUPPRESS_DEPRECATED macro is used to suppress deprecation warnings.
This covers Session Tickets keys, SSL Engine, DH low level API for DHE ciphers.
Unlike OPENSSL_API_COMPAT, it works well with OpenSSL built with no-deprecated.
In particular, it doesn't unhide various macros in OpenSSL includes, which are
meant to be hidden under OPENSSL_NO_DEPRECATED.
The only consumer is a callback function for SSL_CTX_set_tmp_rsa_callback()
deprecated in OpenSSL 1.1.0. Now the function is conditionally compiled too.
The latest HTTP/1.1 draft describes Transfer-Encoding in HTTP/1.0 as having
potentially faulty message framing as that could have been forwarded without
handling of the chunked encoding, and forbids processing subsequest requests
over that connection: https://github.com/httpwg/http-core/issues/879.
While handling of such requests is permitted, the most secure approach seems
to reject them.
The c->read->ready and c->write->ready flags might be reset during
the handshake, and not set again if the handshake was finished on
the other event. At the same time, some data might be read from
the socket during the handshake, so missing c->read->ready flag might
result in a connection hang, for example, when waiting for an SMTP
greeting (which was already received during the handshake).
Found by Sergey Kandaurov.
The ngx_wsasend_chain() and ngx_wsarecv_chain() functions were
modified to use only preallocated memory, and the number of
preallocated wsabufs was increased to 64.
In d1bde5c3c5d2, the number of preallocated iovec's for ngx_readv_chain()
was increased. Still, in some setups, the function might allocate memory
for iovec's from a connection pool, which is only freed when closing the
connection.
The ngx_readv_chain() function was modified to use only preallocated
memory, similarly to the ngx_writev_chain() change in 8e903522c17a.
Control characters (0x00-0x1f, 0x7f) and space are not expected to appear
in the Host header. Requests with such characters in the Host header are
now unconditionally rejected.
In 71edd9192f24 logging of invalid headers which were rejected with the
NGX_HTTP_PARSE_INVALID_HEADER error was restricted to just the "client
sent invalid header line" message, without any attempts to log the header
itself.
This patch returns logging of the header up to the invalid character and
the character itself. The r->header_end pointer is now properly set
in all cases to make logging possible.
The same logging is also introduced when parsing headers from upstream
servers.
Control characters (0x00-0x1f, 0x7f), space, and colon were never allowed in
header names. The only somewhat valid use is header continuation which nginx
never supported and which is explicitly obsolete by RFC 7230.
Previously, such headers were considered invalid and were ignored by default
(as per ignore_invalid_headers directive). With this change, such headers
are unconditionally rejected.
It is expected to make nginx more resilient to various attacks, in particular,
with ignore_invalid_headers switched off (which is inherently unsecure, though
nevertheless sometimes used in the wild).
Control characters (0x00-0x1f, 0x7f) were never allowed in URIs, and must
be percent-encoded by clients. Further, these are not believed to appear
in practice. On the other hand, passing such characters might make various
attacks possible or easier, despite the fact that currently allowed control
characters are not significant for HTTP request parsing.
From now on, requests with spaces in URIs are immediately rejected rather
than allowed. Spaces were allowed in 31e9677b15a1 (0.8.41) to handle bad
clients. It is believed that now this behaviour causes more harm than
good.
Per RFC 3986 only the following characters are allowed in URIs unescaped:
unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
gen-delims = ":" / "/" / "?" / "#" / "[" / "]" / "@"
sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
/ "*" / "+" / "," / ";" / "="
And "%" can appear as a part of escaping itself. The following
characters are not allowed and need to be escaped: %00-%1F, %7F-%FF,
" ", """, "<", ">", "\", "^", "`", "{", "|", "}".
Not escaping ">" is known to cause problems at least with MS Exchange (see
http://nginx.org/pipermail/nginx-ru/2010-January/031261.html) and in
Tomcat (ticket #2191).
The patch adds escaping of the following chars in all URI parts: """, "<",
">", "\", "^", "`", "{", "|", "}". Note that comments are mostly preserved
to outline important characters being escaped.
HTTP clients are not allowed to generate such requests since Transfer-Encoding
introduction in RFC 2068, and they are not expected to appear in practice
except in attempts to perform a request smuggling attack. While handling of
such requests is strictly defined, the most secure approach seems to reject
them.
No valid CONNECT requests are expected to appear within nginx, since it
is not a forward proxy. Further, request line parsing will reject
proper CONNECT requests anyway, since we don't allow authority-form of
request-target. On the other hand, RFC 7230 specifies separate message
length rules for CONNECT which we don't support, so make sure to always
reject CONNECTs to avoid potential abuse.
Previously, TRACE requests were rejected before parsing Transfer-Encoding.
This is not important since keepalive is not enabled at this point anyway,
though rejecting such requests after properly parsing other headers is
less likely to cause issues in case of further code changes.
After 2096b21fcd10, a single RST_STREAM(NO_ERROR) may not result in an error.
This change removes several unnecessary ctx->type checks for such a case.
Recent fixes to SSL shutdown with lingering close (554c6ae25ffc, 1.19.5)
broke logging of SSL variables. To make sure logging of SSL variables
works properly, avoid freeing c->ssl when doing an SSL shutdown before
lingering close.
Reported by Reinis Rozitis
(http://mailman.nginx.org/pipermail/nginx/2021-May/060670.html).
Instead of calling SSL_free() with each return point, introduced a single
place where cleanup happens. As a positive side effect, this fixes two
potential memory leaks on ngx_handle_read_event() and ngx_handle_write_event()
errors where there were no SSL_free() calls (though unlikely practical,
as errors there are only expected to happen due to bugs or kernel issues).
On Linux, SO_REUSEADDR allows completely duplicate UDP sockets, so using
SO_REUSEADDR when testing configuration results in packets being dropped
if there is an existing traffic on the sockets being tested (ticket #2187).
While dropped packets are expected with UDP, it is better to avoid this
when possible.
With this change, SO_REUSEADDR is no longer set on datagram sockets when
testing configuration.
Since we anyway do not set SO_REUSEPORT when testing configuration
(see ecb5cd305b06), trying to open additional sockets does not make much
sense, as all these additional sockets are expected to result in EADDRINUSE
errors from bind(). On the other hand, there are reports that trying
to open these sockets takes significant time under load: total configuration
testing time greater than 15s was observed in ticket #2188, compared to less
than 1s without load.
With this change, no additional sockets are opened during testing
configuration.
Since nginx always uses exactly one entry in the question section of
a DNS query, and never uses compression pointers in this entry, parsing
of a DNS response in ngx_resolver_process_response() does not expect
compression pointers to appear in the question section of the DNS
response. Indeed, compression pointers in the first name of a DNS response
hardly make sense, do not seem to be allowed by RFC 1035 (which says
"a pointer to a prior occurance of the same name", note "prior"), and
were never observed in practice.
Added an explicit check to ngx_resolver_process_response()'s parsing
of the question section to properly report an error if compression pointers
nevertheless appear in the question section.
Instead of checking on each label if we need to place a dot or not,
now it always adds a dot after a label, and reduces the resulting
length afterwards.
Previously, anything with any of the two high bits set were interpreted
as compression pointers. This is incorrect, as RFC 1035 clearly states
that "The 10 and 01 combinations are reserved for future use". Further,
the 01 combination is actually allocated for EDNS extended label type
(see RFC 2671 and RFC 6891), not really used though.
Fix is to reject unrecognized label types rather than misinterpreting
them as compression pointers.
It is believed to be harmless, and in the worst case it uses some
uninitialized memory as a part of the compression pointer length,
eventually leading to the "name is out of DNS response" error.
When variables are used in ssl_certificate or ssl_certificate_key, a request
is created in the certificate callback to evaluate the variables, and then
freed. Freeing it, however, updates c->log->action to "closing request",
resulting in confusing error messages like "client timed out ... while
closing request" when a client times out during the SSL handshake.
Fix is to restore c->log->action after calling ngx_http_free_request().
Similarly to smtpd_hard_error_limit in Postfix and smtp_max_unknown_commands
in Exim, specifies the number of errors after which the connection is closed.
The change is mostly the same as the SMTP one (04e43d03e153 and 3f5d0af4e40a),
and ensures that nginx is able to properly handle or reject multiple IMAP
commands. The s->cmd field is not really used and set for consistency.
Non-synchronizing literals handling in invalid/unknown commands is limited,
so when a non-synchronizing literal is detected at the end of a discarded
line, the connection is closed.
Only "A-Za-z0-9-._" characters now allowed (which is stricter than what
RFC 3501 requires, but expected to be enough for all known clients),
and tags shouldn't be longer than 32 characters.
