It was used to prevent destroying of request object when there are unsent
frames in queue for the stream. Since it was incremented for each frame
and is only 8 bits long, so it was not very hard to overflow the counter.
Now the stream->queued counter is checked instead.
This adds support so it's possible to explicitly disable SSL Session
Tickets. In order to have good Forward Secrecy support either the
session ticket key has to be reloaded by using nginx' binary upgrade
process or using an external key file and reloading the configuration.
This directive adds another possibility to have good support by
disabling session tickets altogether.
If session tickets are enabled and the process lives for a long a time,
an attacker can grab the session ticket from the process and use that to
decrypt any traffic that occured during the entire lifetime of the
process.
If a request had an empty request body (with Content-Length: 0), and there
were preread data available (e.g., due to a pipelined request in the buffer),
the "zero size buf in output" alert might be logged while proxying the
request to an upstream.
Similar alerts appeared with client_body_in_file_only if a request had an
empty request body.
Not really a strict check (as X-Accel-Expires might be ignored or
contain invalid value), but quite simple to implement and better
than what we have now.
Fallback to synchronous sendfile() now only done on 3rd EBUSY without
any progress in a row. Not falling back is believed to be better
in case of occasional EBUSY, though protection is still needed to
make sure there will be no infinite loop.
This fixes content type set in stub_status and autoindex responses
to be usable in content type checks made by filter modules, such
as charset and sub filters.
There is no need to pass FLAG_FIN as a separate argument since it can always be
detected from the last_buf flag of the last frame buffer.
No functional changes.
Processing events from upstream connection can result in sending queued frames
from other streams. In this case such streams were not added to handling queue
and properly handled.
A global per connection flag was replaced by a per stream flag that indicates
currently sending stream while all other streams can be added to handling
queue.
Conditions for skipping ineligible peers are rewritten to make adding of new
conditions simpler and be in line with the "round_robin" and "least_conn"
modules. No functional changes.
This flag in SPDY fake write events serves the same purposes as the "ready"
flag in real events, and it must be dropped if request needs to be handled.
Otherwise, it can prevent the request from finalization if ngx_http_writer()
was set, which results in a connection leak.
Found by Xiaochen Wang.
The following new directives are introduced: proxy_cache_revalidate,
fastcgi_cache_revalidate, scgi_cache_revalidate, uwsgi_cache_revalidate.
Default is off. When set to on, they enable cache revalidation using
conditional requests with If-Modified-Since for expired cache items.
As of now, no attempts are made to merge headers given in a 304 response
during cache revalidation with headers previously stored in a cache item.
Headers in a 304 response are only used to calculate new validity time
of a cache item.
We should just call post_handler() when subrequest wants to read body, like
it happens for HTTP since rev. f458156fd46a. An attempt to init request body
for subrequests results in hang if the body was not already read.
The 403 (Forbidden) should not overwrite 401 (Unauthorized) as the
latter should be returned with the WWW-Authenticate header to request
authentication by a client.
The problem could be triggered with 3rd party modules and the "deny"
directive, or with auth_basic and auth_request which returns 403
(in 1.5.4+).
Patch by Jan Marc Hoffmann.
Much like with other headers, "add_header Cache-Control $value;" no longer
results in anything added to response headers if $value evaluates to an
empty string.
In order to support key rollover, ssl_session_ticket_key can be defined
multiple times. The first key will be used to issue and resume Session
Tickets, while the rest will be used only to resume them.
ssl_session_ticket_key session_tickets/current.key;
ssl_session_ticket_key session_tickets/prev-1h.key;
ssl_session_ticket_key session_tickets/prev-2h.key;
Please note that nginx supports Session Tickets even without explicit
configuration of the keys and this feature should be only used in setups
where SSL traffic is distributed across multiple nginx servers.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
With this change all such frames will be added in front of the output queue, and
will be sent first. It prevents HOL blocking when response with higher priority
is blocked by response with lower priority in the middle of the queue because
the order of their SYN_REPLY frames cannot be changed.
Proposed by Yury Kirpichev.
If an error occurs in a SPDY connection, the c->error flag is set on every fake
request connection, and its read or write event handler is called, in order to
finalize it. But while waiting for request headers, it was a no-op since the
read event handler had been set to ngx_http_empty_handler().
If an error occurs in a SPDY connection, the c->error flag is set on every fake
request connection, and its read or write event handler is called, in order to
finalize it. But while waiting for a request body, it was a no-op since the
read event handler ngx_http_request_handler() calls r->read_event_handler that
had been set to ngx_http_block_reading().
With previous code only part of u->buffer might be emptied in case
of special responses, resulting in partial responses seen by SSI set
in case of simple protocols, or spurious errors like "upstream sent
invalid chunked response" in case of complex ones.
Location tree was always constructed using case-sensitive comparison, even
on case-insensitive systems. This resulted in incorrect operation if
uppercase letters were used in location directives. Notably, the
following config:
location /a { ... }
location /B { ... }
failed to properly map requests to "/B" into "location /B".
Casts between pointers and integers produce warnings on size mismatch. To
silence them, cast to (u)intptr_t should be used. Prevoiusly, casts to
ngx_(u)int_t were used in some cases, and several ngx_int_t expressions had
no casts.
As of now it's mostly style as ngx_int_t is defined as intptr_t.
On win32, time_t is 64 bits wide by default, and passing an ngx_msec_int_t
argument for %T format specifier doesn't work. This doesn't manifest itself
on other platforms as time_t and ngx_msec_int_t are usually of the same size.
Several false positive warnings silenced, notably W8012 "Comparing
signed and unsigned" (due to u_short values promoted to int), and
W8072 "Suspicious pointer arithmetic" (due to large type values added
to pointers).
With this patch, it's now again possible to compile nginx using bcc32,
with options we normally compile on win32 minus ipv6 and ssl.
Precompiled headers are disabled as they lead to internal compiler errors
with long configure lines. Couple of false positive warnings silenced.
Various win32 typedefs are adjusted to work with Open Watcom C 1.9 headers.
With this patch, it's now again possible to compile nginx using owc386,
with options we normally compile on win32 minus ipv6 and ssl.
It is believed to be better than fallback to HTTP/0.9, because most of
the clients at present time support HTTP/1.0. It allows nginx to return
error response code for them in cases when it fail to parse request line,
and therefore fail to detect client protocol version.
Even if the client does not support HTTP/1.0, this assumption should not
cause any harm, since from the HTTP/0.9 point of view it still a valid
response.
Without u->header_sent set a special response might be generated following
an upgraded connection. The problem appeared in 1ccdda1f37f3 (1.5.3).
Catched by "header already sent" alerts in 1.5.4 after upstream timeouts.
This allows to approach "server_name" values specified below the
"valid_referers" directive when used within the "server_names" parameter, e.g.:
server_name example.org;
valid_referers server_names;
server_name example.com;
As a bonus, this fixes bogus error with "server_names" specified several times.
The server_name regexes are normally compiled for case-sensitive matching.
This violates case-insensitive obligations in the referer module. To fix
this, the host string is converted to lower case before matching.
Previously server_name regex was executed against the whole referer string
after dropping the scheme part. This could led to an improper matching, e.g.:
server_name ~^localhost$;
valid_referers server_names;
Referer: http://localhost/index.html
It was changed to look only at the hostname part.
The server_name regexes are separated into another array to not clash with
regular regexes.
If Content-Length header is not set, and the image size is larger than the
buffer size, client will hang until a timeout occurs.
Now NGX_HTTP_UNSUPPORTED_MEDIA_TYPE is returned immediately.
diff -r d1403de41631 -r 4fae04f332b4
src/http/modules/ngx_http_image_filter_module.c
Missing call to ngx_http_run_posted_request() resulted in a main request hang
if subrequest's ssl handshake with an upstream server failed for some reason.
Reported by Aviram Cohen.
While ngx_get_full_name() might have a bit more descriptive arguments,
the ngx_conf_full_name() is generally easier to use when parsing
configuration and limits exposure of cycle->prefix / cycle->conf_prefix
details.
They refer to the same socket descriptor as our real connection, and
deleting them will stop processing of the connection.
Events of fake connections must not be activated, and if it happened there
is nothing we can do. The whole processing should be terminated as soon as
possible, but it is not obvious how to do this safely.
A quote from SPDY draft 2 specification: "The length of each name and
value must be greater than zero. A receiver of a zero-length name or
value must send a RST_STREAM with code PROTOCOL error."
But it appears that Chrome browser allows sending requests over SPDY/2
connection using JavaScript that contain headers with empty values.
For better compatibility across SPDY clients and to be compliant with
HTTP, such headers are no longer rejected.
Also, it is worth noting that in SPDY draft 3 the statement has been
changed so that it permits empty values for headers.
When matching a compiled regex against value in the "Referer" header field,
the length was calculated incorrectly for strings that start from "https://".
This might cause matching to fail for regexes with end-of-line anchors.
Patch by Liangbin Li.
If a relative path is set by variables, then the ngx_conf_full_name()
function was called while processing requests, which causes allocations
from the cycle pool.
A new function that takes pool as an argument was introduced.
Though there are several MIME types commonly used for JavaScript nowadays,
the most common being "text/javascript", "application/javascript", and
currently used by nginx "application/x-javascript", RFC 4329 prefers
"application/javascript".
The "charset_types" directive's default value was adjusted accordingly.
As per perlxs, C preprocessor directives should be at the first
non-whitespace of a line to avoid interpreting them as comments.
#if and #endif are moved so that there are no blank lines before them
to retain them as part of the function body.
Previously, after sending a header we always sent a last buffer and
finalized a request with code 0, even in case of errors. In some cases
this resulted in a loss of ability to detect the response wasn't complete
(e.g. if Content-Length was removed from a response by gzip filter).
This change tries to propogate to a client information that a response
isn't complete in such cases. In particular, with this change we no longer
pretend a returned response is complete if we wasn't able to create
a temporary file.
If an error code suggests the error wasn't fatal, we flush buffered data
and disable keepalive, then finalize request normally. This allows to to
propogate information about a problem to a client, while still sending all
the data we've got from an upstream.
No semantic changes expected, though some checks are done differently.
In particular, the r->cached flag is no longer explicitly checked. Instead,
we relay on u->header_sent not being set if a response is sent from
a cache.
The NGX_HTTP_CLIENT_CLOSED_REQUEST code is allowed to happen after we
started sending a response (much like NGX_HTTP_REQUEST_TIME_OUT), so there
is no need to reset response code to 0 in this case.
Checks were added to both buffered and unbuffered code paths to detect
and complain if a response is incomplete. Appropriate error codes are
now passed to ngx_http_upstream_finalize_request().
With this change in unbuffered mode we now use u->length set to -1 as an
indicator that EOF is allowed per protocol and used to indicate response
end (much like its with p->length in buffered mode). Proxy module was
changed to set u->length to 1 (instead of previously used -1) in case of
chunked transfer encoding used to comply with the above.
That is, by default we assume that response end is signalled by
a connection close. This seems to be better default, and in line
with u->pipe->length behaviour.
Memcached module was modified accordingly.
In case of upstream eof, only responses with u->pipe->length == -1
are now cached/stored. This ensures that unfinished chunked responses
are not cached.
Note well - previously used checks for u->headers_in.content_length_n are
preserved. This provides an additional level of protection if protol data
disagree with Content-Length header provided (e.g., a FastCGI response
is sent with wrong Content-Length, or an incomple SCGI or uwsgi response),
as well as protects from storing of responses to HEAD requests. This should
be reconsidered if we'll consider caching of responses to HEAD requests.
There is no real difference from previously used 0 as NGX_HTTP_* will
become 0 in ngx_http_upstream_finalize_request(), but the change
preserves information about a timeout a bit longer. Previous use of
ETIMEDOUT in one place was just wrong.
Note well that with cacheable responses there will be a difference
(code in ngx_http_upstream_finalize_request() will store the error
in cache), though this change doesn't touch cacheable case.
Previously, ngx_http_upstream_finalize_request(0) was used in most
cases after errors. While with current code there is no difference,
use of NGX_ERROR allows to pass a bit more information into
ngx_http_upstream_finalize_request().
In all cases ngx_http_upstream_finalize_request() with NGX_ERROR now used.
Previously used NGX_HTTP_INTERNAL_SERVER_ERROR in the subrequest in memory
case don't cause any harm, but inconsistent with other uses.
Previous code called ngx_http_finalize_request() with rc = 0. This is
ok if a response status was already set, but resulted in "000" being
logged if it wasn't. In particular this happened with limit_req
if a connection was prematurely closed during limit_req delay.
After a failed partial match we now check if there is another partial
match in previously matched substring to fix cases like "aab" in "aaab".
The ctx->saved string is now always sent if it's present on return
from the ngx_http_sub_parse() function (and reset accordingly). This
allows to release parts of previously matched data.
If a pattern was partially matched at a response end, partially matched
string wasn't send. E.g., a response "fo" was truncated to an empty response
if partially mathed by a pattern "foo".
It is possible to send FLAG_FIN in additional empty data frame, even if it is
known from the content-length header that request body is empty. And Firefox
actually behaves like this (see ticket #357).
To simplify code we sacrificed our microoptimization that did not work right
due to missing check in the ngx_http_spdy_state_data() function for rb->buf
set to NULL.
The exsltRegisterAll() needs to be called before XSLT stylesheets
are compiled, else stylesheet compilation hooks will not work. This
change fixes EXSLT Functions extension.
On Linux, sockaddr length is required to process unix socket addresses properly
due to unnamed sockets (which don't have sun_path set at all) and abstract
namespace sockets.
Minimal data length we expect for further calls was calculated incorrectly
if parsing stopped right after parsing chunk size. This might in theory
affect clients and/or backends using LF instead of CRLF.
Patch by Dmitry Popov.
When several "error_log" directives are specified in the same configuration
block, logs are written to all files with a matching log level.
All logs are stored in the singly-linked list that is sorted by log level in
the descending order.
Specific debug levels (NGX_LOG_DEBUG_HTTP,EVENT, etc.) are not supported
if several "error_log" directives are specified. In this case all logs
will use debug level that has largest absolute value.
Valgrind complains if we pass uninitialized memory to a syscall:
==36492== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s)
==36492== at 0x6B5E6A: sendmsg (in /usr/lib/system/libsystem_kernel.dylib)
==36492== by 0x10004288E: ngx_signal_worker_processes (ngx_process_cycle.c:527)
==36492== by 0x1000417A7: ngx_master_process_cycle (ngx_process_cycle.c:203)
==36492== by 0x100001F10: main (nginx.c:410)
==36492== Address 0x7fff5fbff71c is on thread 1's stack
Even initialization of all members of the structure passed isn't enough, as
there is padding which still remains uninitialized and results in Valgrind
complaint. Note there is no real problem here as data from uninitialized
memory isn't used.
If "stderr" was specified in one of the "error_log" directives,
stderr is not redirected to the first error_log on startup,
configuration reload, and reopening log files.
The parameter is mostly identical to http_404, and is expected to
be used in similar situations. The 403 code might be returned by
a backend instead of 404 on initial sync of new directories with rsync.
See here for feature request and additional details:
http://mailman.nginx.org/pipermail/nginx-ru/2013-April/050920.html
An invalid memcached reply that started with '\n' could cause
segmentation fault.
An invalid memcached reply "VALUE / 0 2\r?ok\r\nEND\r\n" was
considered as a valid response.
In addition, if memcached reports that the key was not found,
set u->headers_in.content_length_n to 0. This ensures that
ngx_http_memcached_filter() will not be called while previous
code relied on always intercepting 404. Initialization of
ctx->rest was moved to where it belongs.
Due to peer->checked always set since rev. c90801720a0c (1.3.0)
by round-robin and least_conn balancers (ip_hash not affected),
the code in ngx_http_upstream_free_round_robin_peer() function
incorrectly reset peer->fails too often.
Reported by Dmitry Popov,
http://mailman.nginx.org/pipermail/nginx-devel/2013-May/003720.html
There are two significant changes in this patch:
1) The <= 0 comparison is done with a signed type. This fixes the case
of ngx_time() being larger than r->lingering_time.
2) Calculation of r->lingering_time - ngx_time() is now always done
in the ngx_msec_t type. This ensures the calculation is correct
even if time_t is unsigned and differs in size from ngx_msec_t.
Thanks to Lanshun Zhou.
Previously, input pattern was kept only for regular expressions
with named captures, which resulted in error log entries without
input pattern for PCRE errors that occured while processing
regular expressions without them.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
The $proxy_internal_body_length value might change during request lifetime,
notably if proxy_set_body used, and use of a cached value might result in
incorrect upstream requests.
Patch by Lanshun Zhou.
As of now, it allows to better control bandwidth limiting from additional
modules. It is also expected to be used to add variables support to
the limit_rate_after directive.
If nginx was compiled without --with-http_ssl_module, but with some
other module which uses OpenSSL (e.g. --with-mail_ssl_module), insufficient
preprocessor check resulted in build failure. The problem was introduced
by e0a3714a36f8 (1.3.14).
Reported by Roman Arutyunyan.
This is to avoid setting the TCP_NODELAY flag on SPDY socket in
ngx_http_upstream_send_response(). The latter works per request,
but in SPDY case it might affect other streams in connection.
As of 1.3.9, chunked request body may be available with
r->headers_in.content_length_n <= 0. Additionally, request body
may be in multiple buffers even if r->request_body_in_single_buf
was requested.
Dependancy tracking introduced in r5169 were not handled absolute path
names properly. Absolute names might appear in CORE_DEPS if --with-openssl
or --with-pcre configure arguments are used to build OpenSSL/PCRE
libraries.
Additionally, revert part of r5169 to set NGX_INCS from Makefile
variables. Makefile variables have $ngx_include_opt in them, which
might result in wrong include paths being used. As a side effect,
this also restores build with --with-http_perl_module and --without-http
at the same time.
Before 1.3.9 an attempt to read body in a subrequest only caused problems
if body wasn't already read or discarded in a main request. Starting with
1.3.9 it might also cause problems if body was discarded by a main request
before subrequest start.
Fix is to just ignore attempts to read request body in a subrequest, which
looks like right thing to do anyway.
To avoid further breaks it's now done properly, all the dependencies
are now passed to Makefile.PL. While here, fixed include list passed to
Makefile.PL to use Makefile variables rather than a list expanded during
configure.
Sorting of upstream servers by their weights is not required by
current balancing algorithms.
This will likely change mapping to backends served by ip_hash
weighted upstreams.
And corresponding variable $connections_waiting was added.
Previously, waiting connections were counted as the difference between
active connections and the sum of reading and writing connections.
That made it impossible to count more than one request in one connection
as reading or writing (as is the case for SPDY).
Also, we no longer count connections in handshake state as waiting.
This should improve behavior under deficiency of connections.
Since SSL handshake usually takes significant amount of time,
we exclude connections from reusable queue during this period
to avoid premature flush of them.
If proxy_pass to a host with dynamic resolution was used to handle
a subrequest, and host resolution failed, the main request wasn't run
till something else happened on the connection. E.g. request to "/zzz"
with the following configuration hanged:
addition_types *;
resolver 8.8.8.8;
location /test {
set $ihost xxx;
proxy_pass http://$ihost;
}
location /zzz {
add_after_body /test;
return 200 "test";
}
Report and original version of the patch by Lanshun Zhou,
http://mailman.nginx.org/pipermail/nginx-devel/2013-March/003476.html.
Code to reuse of r->request_body->buf in upstream module assumes it's
dedicated buffer, hence after 1.3.9 (r4931) it might reuse r->header_in
if client_body_in_file_only was set, resulting in original request
corruption. It is considered to be safer to always create a dedicated
buffer for rb->bufs to avoid such problems.
After introduction of chunked request body handling in 1.3.9 (r4931),
r->request_body->bufs buffers have b->start pointing to original buffer
start (and b->pos pointing to real data of this particular buffer).
While this is ok as per se, it caused bad things (usually original request
headers included before the request body) after reinit of the request
chain in ngx_http_upstream_reinit() while sending the request to a next
upstream server (which used to do b->pos = b->start for each buffer
in the request chain).
Patch by Piotr Sikora.
If c->recv() returns 0 there is no sense in using ngx_socket_errno for
logging, its value meaningless. (The code in question was copied from
ngx_http_keepalive_handler(), but ngx_socket_errno makes sense there as it's
used as a part of ECONNRESET handling, and the c->recv() call is preceeded
by the ngx_set_socket_errno(0) call.)
In r2411 setting of NGX_HTTP_GZIP_BUFFERED in c->buffered was moved from
ngx_http_gzip_filter_deflate_start() to ngx_http_gzip_filter_buffer() since
it was always called first. But in r2543 the "postpone_gzipping" directive
was introduced, and if postponed gzipping is disabled (the default setting),
ngx_http_gzip_filter_buffer() is not called at all.
We must always set NGX_HTTP_GZIP_BUFFERED after the start of compression
since there is always a trailer that is buffered.
There are no known cases when it leads to any problem with current code.
But we already had troubles in upcoming SPDY implementation.
Not only this is useful for the upcoming SPDY support, but it can
also help to improve HTTPS performance by enabling TLS False Start
in Chrome/Chromium browsers [1]. So, we always enable NPN for HTTPS
if it is supported by OpenSSL.
[1] http://www.imperialviolet.org/2012/04/11/falsestart.html
The c->single_connection was intended to be used as lock mechanism
to serialize modifications of request object from several threads
working with client and upstream connections. The flag is redundant
since threads in nginx have never been used that way.
In Linux 2.6.32, TCP_DEFER_ACCEPT was changed to accept connections
after the deferring period is finished without any data available.
(Reading from the socket returns EAGAIN in this case.)
Since in nginx TCP_DEFER_ACCEPT is set to "post_accept_timeout", we
do not need to wait longer if deferred accept returns with no data.
Previously, only the first request in a connection used timeout
value from the "client_header_timeout" directive while reading
header. All subsequent requests used "keepalive_timeout" for
that.
It happened because timeout of the read event was set to the
value of "keepalive_timeout" in ngx_http_set_keepalive(), but
was not removed when the next request arrived.
Previously, we always created an object and logged 400 (Bad Request)
in access log if a client closed connection without sending any data.
Such a connection was counted as "reading".
Since it's common for modern browsers to behave like this, it's no
longer considered an error if a client closes connection without
sending any data, and such a connection will be counted as "waiting".
Now, we do not log 400 (Bad Request) and keep memory footprint as
small as possible.
Previously, it was allocated from a connection pool and
was selectively freed for an idle keepalive connection.
The goal is to put coupled things in one chunk of memory,
and to simplify handling of request objects.
According to RFC 6066, client is not supposed to request a different server
name at the application layer. Server implementations that rely upon these
names being equal must validate that a client did not send a different name
in HTTP request. Current versions of Apache HTTP server always return 400
"Bad Request" in such cases.
There exist implementations however (e.g., SPDY) that rely on being able to
request different host names in one connection. Given this, we only reject
requests with differing host names if verification of client certificates
is enabled in a corresponding server configuration.
An example of configuration that might not work as expected:
server {
listen 433 ssl default;
return 404;
}
server {
listen 433 ssl;
server_name example.org;
ssl_client_certificate org.cert;
ssl_verify_client on;
}
server {
listen 433 ssl;
server_name example.com;
ssl_client_certificate com.cert;
ssl_verify_client on;
}
Previously, a client was able to request example.com by presenting
a certificate for example.org, and vice versa.
Not only this is consistent with a case without SNI, but this also
prevents abusing configurations that assume that the $host variable
is limited to one of the configured names for a server.
An example of potentially unsafe configuration:
server {
listen 443 ssl default_server;
...
}
server {
listen 443;
server_name example.com;
location / {
proxy_pass http://$host;
}
}
Note: it is possible to negotiate "example.com" by SNI, and to request
arbitrary host name that does not exist in the configuration above.
Previously, this was done only after the whole request header
was parsed, and if an error occurred earlier then the request
was processed in the default server (or server chosen by SNI),
while r->headers_in.server might be set to the value from the
Host: header or host from request line.
r->headers_in.server is in turn used for $host variable and
in HTTP redirects if "server_name_in_redirect" is disabled.
Without the change, configurations that rely on this during
error handling are potentially unsafe if SNI is used.
This change also allows to use server specific settings of
"underscores_in_headers", "ignore_invalid_headers", and
"large_client_header_buffers" directives for HTTP requests
and HTTPS requests without SNI.
The request object will not be created until SSL handshake is complete.
This simplifies adding another connection handler that does not need
request object right after handshake (e.g., SPDY).
There are also a few more intentional effects:
- the "client_header_buffer_size" directive will be taken from the
server configuration that was negotiated by SNI;
- SSL handshake errors and timeouts are not logged into access log
as bad requests;
- ngx_ssl_create_connection() is not called until the first byte of
ClientHello message was received. This also decreases memory
consumption if plain HTTP request is sent to SSL socket.
Previously, only the first request in a connection was assigned the
configuration selected by SNI. All subsequent requests initially
used the default server's configuration, ignoring SNI, which was
wrong.
Now all subsequent requests in a connection will initially use the
configuration selected by SNI. This is done by storing a pointer
to configuration in http connection object. It points to default
server's configuration initially, but changed upon receipt of SNI.
(The request's configuration can be further refined when parsing
the request line and Host: header.)
This change was not made specific to SNI as it also allows slightly
faster access to configuration without the request object.
This change helps to decouple ngx_http_ssl_servername() from the request
object.
Note: now we close connection in case of error during server name lookup
for request. Previously, we did so only for HTTP/0.9 requests.
In case multiple "Cache-Control" headers are sent to a client,
multiple values in $sent_http_cache_control were incorrectly
split by a semicolon. Now they are split by a comma.
In case of error in the read event handling we close a connection
by calling ngx_http_close_connection(), that also destroys connection
pool. Thereafter, an attempt to free a buffer (added in r4892) that
was allocated from the pool could cause SIGSEGV and is meaningless
as well (the buffer already freed with the pool).
It was added in r2717 and no longer needed since r2721,
where the termination was added to ngx_shm_alloc() and
ngx_init_zone_pool(). So then it only corrupts error
messages about ivalid zones.
This allows to proxy WebSockets by using configuration like this:
location /chat/ {
proxy_pass http://backend;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
}
Connection upgrade is allowed as long as it was requested by a client
via the Upgrade request header.
If fastcgi end request record was split between several network packets,
with fastcgi_keep_conn it was possible that connection was saved in incorrect
state (e.g. with padding bytes not yet read).
Checks for f->padding before state transitions make code hard to follow,
remove them and make sure we always do another loop iteration after
f->state is set to ngx_http_fastcgi_st_padding.
With fastcgi_keep_conn it was possible that connection was closed after
FCGI_STDERR record with zero padding and without any further data read yet.
This happended as f->state was set to ngx_http_fastcgi_st_padding and then
"break" happened, resulting in p->length being set to f->padding, i.e. 0
(which in turn resulted in connection close).
Fix is to make sure we continue the loop after f->state is set.
After introduction of chunked request body reading support in 1.3.9 (r4931),
the rb->bufs wasn't set if request body was fully preread while calling the
ngx_http_read_client_request_body() function.
Reported by Yichun Zhang (agentzh).
The "secure_link_secret" directive was always inherited from the outer
configuration level even when "secure_link" and "secure_link_md5" were
specified on the inner level.
Before the patch if proxy_method was specified at http{} level the code
to add trailing space wasn't executed, resulting in incorrect requests
to upstream.
The "proxy_bind", "fastcgi_bind", "uwsgi_bind", "scgi_bind" and
"memcached_bind" directives are now inherited; inherited value
can be reset by the "off" parameter. Duplicate directives are
now detected. Parameter value can now contain variables.
Upstreams created by "proxy_pass" with IP address and no port were
broken in 1.3.10, by not initializing port in u->sockaddr.
API change: ngx_parse_url() was modified to always initialize port
(in u->sockaddr and in u->port), even for the u->no_resolve case;
ngx_http_upstream() and ngx_http_upstream_add() were adopted.
Previously, "default" was equivalent to specifying 0.0.0.0/0, now
it's equivalent to specifying both 0.0.0.0/0 and ::/0 (if support
for IPv6 is enabled) with the same value.
The code refactored in a way to call custom handler that can do appropriate
cleanup work (if any), like flushing buffers, finishing compress streams,
finalizing connections to log daemon, etc..
Previously a new buffer was allocated for every "access_log" directive with the
same file path and "buffer=" parameters, while only one buffer per file is used.
Configurations like
location /i/ {
image_filter resize 200 200;
image_filter rotate 180;
location /i/foo/ {
image_filter resize 200 200;
}
}
resulted in rotation incorrectly applied in the location /i/foo, without
any way to clear it. Fix is to handle conf->angle/conf->acv consistently
with other filter variables and do not try to inherit them if there are
transformations defined for current location.
The image_filter_jpeg_quality, image_filter_sharpen and "image_filter rotate"
were inherited incorrectly if a directive with variables was defined, and
then redefined to a literal value, i.e. in configurations like
image_filter_jpeg_quality $arg_q;
location / {
image_filter_jpeg_quality 50;
}
Patch by Ian Babrou, with minor changes.
An incorrect memLevel (lower than 1) might be passed to deflateInit2() if the
"gzip_hash" directive is set to a value less than the value of "gzip_window"
directive. This resulted in "deflateInit2() failed: -2" alert and an empty
reply.
Configuration like
location / {
set $true 1;
if ($true) {
proxy_pass http://backend;
}
if ($true) {
# nothing
}
}
resulted in segmentation fault due to NULL pointer dereference as the
upstream configuration wasn't initialized in an implicit location created
by the last if(), but the r->content_handler was set due to first if().
Instead of committing a suicide by dereferencing a NULL pointer, return
500 (Internal Server Error) in such cases, i.e. if uscf is NULL. Better
fix would be to avoid such cases by fixing the "if" directive handling,
but it's out of scope of this patch.
Prodded by Piotr Sikora.
If write events are not blocked, an extra write event might happen for
various reasons (e.g. as a result of a http pipelining), resulting in
incorrect body being passed to a post handler.
The problem manifested itself with the dav module only, as this is
the only module which reads the body from a content phase handler (in
contrast to exclusive content handlers like proxy). Additionally, dav
module used to dump core in such situations due to ticket #238.
See reports here:
http://mailman.nginx.org/pipermail/nginx-devel/2012-November/002981.htmlhttp://serverfault.com/questions/449195/nginx-webdav-server-with-auth-request
While discarding chunked request body in some cases after detecting
request body corruption no error was returned, while it was possible
to correctly return 400 Bad Request. If error is detected too late,
make sure to properly close connection.
Additionally, in ngx_http_special_response_handler() don't return body
of 500 Internal Server Error to a client if ngx_http_discard_request_body()
fails, but disable keepalive and continue.
Even if there is no preread data, make sure to always call
ngx_http_discard_request_body_filter() in case of chunked request
body to initialize r->headers_in.content_length_n for later use.
An attempt to call ngx_handle_read_event() before actually reading
data from a socket might result in read event being disabled, which is
wrong. Catched by body.t test on Solaris.
The r->main->count reference counter was always incremented in
ngx_http_read_client_request_body(), while it is only needs to be
incremented on positive returns.
The $request_body variable was assuming there can't be more than two
buffers. While this is currently true due to request body reading
implementation details, this is not a good thing to depend on and may
change in the future.
It is not about "Method" but a generic message, and is expected to be used
e.g. if specified Transfer-Encoding is not supported. Fixed message to
match RFC 2616.
Additionally, disable keepalive on such errors as we won't be able to read
request body correctly if we don't understand Transfer-Encoding used.
If request body reading happens with different options it's possible
that there will be no r->request_body->temp_file available (or even
no r->request_body available if body was discarded). Return internal
server error in this case instead of committing suicide by dereferencing
a null pointer.
Pending EOF might be reported on both read and write events, whichever
comes first, so check both of them.
Patch by Yichun Zhang (agentzh), slightly modified.
If an upstream block was defined with the only server marked as
"down", e.g.
upstream u {
server 127.0.0.1:8080 down;
}
an attempt was made to contact the server despite the "down" flag.
It is believed that immediate 502 response is better in such a
case, and it's also consistent with what is currently done in case
of multiple servers all marked as "down".
Input filter might free a buffer if there is no data in it, and in case
of first buffer (used for cache header and request header, aka p->buf_to_file)
this resulted in cache corruption. Buffer memory was reused to read upstream
response before headers were written to disk.
Fix is to avoid moving pointers in ngx_event_pipe_add_free_buf() to a buffer
start if we were asked to free a buffer used by p->buf_to_file.
This fixes occasional cache file corruption, usually resulted
in "cache file ... has md5 collision" alerts.
Reported by Anatoli Marinov.
idle connections.
This behaviour is consistent with the ngx_http_set_keepalive() function and it
should decrease memory usage in some cases (especially if epoll/rtsig is used).
This parameter allows to don't require certificate to be signed by
a trusted CA, e.g. if CA certificate isn't known in advance, like in
WebID protocol.
Note that it doesn't add any security unless the certificate is actually
checked to be trusted by some external means (e.g. by a backend).
Patch by Mike Kazantsev, Eric O'Connor.
OCSP response verification is now switched off by default to simplify
configuration, and the ssl_stapling_verify allows to switch it on.
Note that for stapling OCSP response verification isn't something required
as it will be done by a client anyway. But doing verification on a server
allows to mitigate some attack vectors, most notably stop an attacker from
presenting some specially crafted data to all site clients.
This includes the ssl_stapling_responder directive (defaults to OCSP
responder set in certificate's AIA extension).
OCSP response for a given certificate is requested once we get at least
one connection with certificate_status extension in ClientHello, and
certificate status won't be sent in the connection in question. This due
to limitations in the OpenSSL API (certificate status callback is blocking).
Note: SSL_CTX_use_certificate_chain_file() was reimplemented as it doesn't
allow to access the certificate loaded via SSL_CTX.
Very basic version without any OCSP responder query code, assuming valid
DER-encoded OCSP response is present in a ssl_stapling_file configured.
Such file might be produced with openssl like this:
openssl ocsp -issuer root.crt -cert domain.crt -respout domain.staple \
-url http://ocsp.example.com
The directive allows to specify additional trusted Certificate Authority
certificates to be used during certificate verification. In contrast to
ssl_client_certificate DNs of these cerificates aren't sent to a client
during handshake.
Trusted certificates are loaded regardless of the fact whether client
certificates verification is enabled as the same certificates will be
used for OCSP stapling, during construction of an OCSP request and for
verification of an OCSP response.
The same applies to a CRL (which is now always loaded).
With "always" gzip static returns gzipped content in all cases, without
checking if client supports it. It is useful if there are no uncompressed
files on disk anyway.
This directive allows to test desired flag as returned by memcached and
sets Content-Encoding to gzip if one found.
This is reimplementation of patch by Tomash Brechko as available on
http://openhack.ru/. It should be a bit more correct though (at least
I think so). In particular, it doesn't try to detect if we are able to
gunzip data, but instead just sets correct Content-Encoding.
The rbtree used in ngx_http_limit_req_module has two level of keys, the top is
hash, and the next is the value string itself. However, when inserting a new
node, only hash has been set, while the value string has been left empty.
The bug was introduced in r4419 (1.1.14).
Found by Charles Chen.
The "include" directive should be able to include multiple files if
given a filename mask. Fixed this to work for "include" directives
inside the "map" or "types" blocks. The "include" directive inside
the "geo" block is still not fixed.
Previous code incorrectly used ctx->var_values as an array of pointers to
ngx_http_variable_value_t, but the array contains structures, not pointers.
Additionally, ctx->var_values inspection failed to properly set var on
match.
There is a general consensus that this change results in better
consistency between different operating systems and differently
tuned operating systems.
Note: this changes the width and meaning of the ipv6only field
of the ngx_listening_t structure. 3rd party modules that create
their own listening sockets might need fixing.
Hide headers and pass headers arrays might not be inherited correctly
into a nested location, e.g. in configuration like
server {
proxy_hide_header X-Foo;
location / {
location /nested/ {
proxy_pass_header X-Pad;
}
}
}
the X-Foo header wasn't hidden in the location /nested/.
Reported by Konstantin Svist,
http://mailman.nginx.org/pipermail/nginx-ru/2012-July/047555.html
the end (closes#187). Failure to do so could result in several listen
sockets to be created instead of only one listening on wildcard address.
Reported by Roman Odaisky.
It allows to disable generation of nginx's own entity tags, while
still handling ETags in cache properly. This may be useful e.g.
if one want to serve static files from servers with different ETag
generation algorithms.
This includes handling of ETag headers (if present in a response) with
basic support for If-Match, If-None-Match conditionals in not modified
filter.
Note that the "r->headers_out.last_modified_time == -1" check in the not
modified filter is left as is intentionally. It's to prevent handling
of If-* headers in case of proxy without cache (much like currently
done with If-Modified-Since).
This makes code more extendable. The only functional change is when
If-Modified-Since and If-Unmodified-Since are specified together, the
case which is explicitly left undefined by RFC 2616. The new behaviour
is to respect them both, which seems better.
If modification time isn't known, skip range processing and return full
entity body instead of just ignoring If-Range. Ignoring If-Range isn't
safe as client will assume entity wasn't changed since time specified.
The original idea was to optimize edge cases in case of interchangeable
backends, i.e. don't establish a new connection if we have any one
cached. This causes more harm than good though, as it screws up
underlying balancer's idea about backends used and may result in
various unexpected problems.
Number of entries in stsc atom was wrong if we've added an entry to
split a chunk.
Additionally, there is no need to add an entry if we are going to split
last chunk in an entry, it's enough to update the entry we already have.
Previously new entry was added and old one was left as is, resulting in
incorrect entry with zero chunks which might confuse some software.
Contains response status code as a 3-digit integer
(with leading zeroes if necessary), or one of the following values:
000 - response status code has not yet been assigned
009 - HTTP/0.9 request is being processed
There are too many problems with special NTFS streams, notably "::$data",
"::$index_allocation" and ":$i30:$index_allocation".
For now we don't reject all URIs with ":" like Apache does as there are no
good reasons seen yet, and there are multiple programs using it in URLs
(e.g. MediaWiki).
Windows treats "/directory./" identical to "/directory/". Do the same
when working on Windows. Note that the behaviour is different from one
with last path component (where multiple spaces and dots are ignored by
Windows).
Removed duplicate call of ngx_http_upstream_init_round_robin_peer()
overlooked during code changes. Rewritten "return lcp->free_rr_peer(...)"
as MSVC doesn't like it.
If the "proxy_cookie_domain" or "proxy_cookie_path" directive is used and there
are no matches in Set-Cookie header then ngx_http_proxy_rewrite_cookie() returns
NGX_DECLINED to indicate that the header was not rewritten. Returning this value
further from the upstream headers copy handler resulted in 500 error response.
See here for report:
http://mailman.nginx.org/pipermail/nginx/2012-May/033858.html
If variable was indexed in previous configuration but not in current
one, the NGX_HTTP_VAR_INDEXED flag was left set and confused
ngx_http_get_variable().
Patch by Yichun Zhang (agentzh), slightly modified.
Example configuration to reproduce:
location /image/ {
error_page 415 = /zero;
image_filter crop 100 100;
proxy_pass http://127.0.0.1:8080;
proxy_store on;
}
location /zero {
return 204;
}
The problem appeared if upstream returned (big enough) non-image file,
causing 415 to be generated by image filter.
The module now supports recursive search of client address through the
chain of trusted proxies (closes#100), in the same scope as the geo
module. Proxies are listed by the "geoip_proxy" directive, recursive
search is enabled by the "geoip_proxy_recursive" directive. IPv6 is
partially supported: proxies may be specified with IPv6 addresses.
Example:
geoip_country .../GeoIP.dat;
geoip_proxy 127.0.0.1;
geoip_proxy ::1;
geoip_proxy 10.0.0.0/8;
geoip_proxy_recursive on;
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "proxy_recursive"
directive in the "geo" block. It also gets partial IPv6 support:
now proxies may be specified with IPv6 addresses.
Example:
geo $test {
...
proxy 127.0.0.1;
proxy ::1;
proxy_recursive;
}
There's also a slight change in behavior. When original client
address (as specified by the "geo" directive) is one of the
trusted proxies, and the value of the X-Forwarded-For request
header cannot not be parsed as a valid address, an original client
address will be used for lookup. Previously, 255.255.255.255 was
used in this case.
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "real_ip_recursive"
directive (closes#2). It also gets full IPv6 support (closes#44)
and canonical value of the $client_addr variable on address change.
Example:
real_ip_header X-Forwarded-For;
set_real_ip_from 127.0.0.0/8;
set_real_ip_from ::1;
set_real_ip_from unix:;
real_ip_recursive on;
On input it takes an original address, string in the X-Forwarded-For format
and its length, list of trusted proxies, and a flag indicating to perform
the recursive search. On output it returns NGX_OK and the "deepest" valid
address in a chain, or NGX_DECLINED. It supports AF_INET and AF_INET6.
Additionally, original address and/or proxy may be specified as AF_UNIX.
Due to weight being set to 0 for down peers, order of peers after sorting
wasn't the same as without the "down" flag (with down peers at the end),
resulting in client rebalancing for clients on other servers. The only
rebalancing which should happen after adding "down" to a server is one
for clients on the server.
The problem was introduced in r1377 (which fixed endless loop by setting
weight to 0 for down servers). The loop is no longer possible with new
smooth algorithm, so preserving original weight is safe.
For edge case weights like { 5, 1, 1 } we now produce { a, a, b, a, c, a, a }
sequence instead of { c, b, a, a, a, a, a } produced previously.
Algorithm is as follows: on each peer selection we increase current_weight
of each eligible peer by its weight, select peer with greatest current_weight
and reduce its current_weight by total number of weight points distributed
among peers.
In case of { 5, 1, 1 } weights this gives the following sequence of
current_weight's:
a b c
0 0 0 (initial state)
5 1 1 (a selected)
-2 1 1
3 2 2 (a selected)
-4 2 2
1 3 3 (b selected)
1 -4 3
6 -3 4 (a selected)
-1 -3 4
4 -2 5 (c selected)
4 -2 -2
9 -1 -1 (a selected)
2 -1 -1
7 0 0 (a selected)
0 0 0
To preserve weight reduction in case of failures the effective_weight
variable was introduced, which usually matches peer's weight, but is
reduced temporarily on peer failures.
This change also fixes loop with backup servers and proxy_next_upstream
http_404 (ticket #47), and skipping alive upstreams in some cases if there
are multiple dead ones (ticket #64).
With r->filter_finalize set the ngx_http_finalize_connection() wasn't
called from ngx_http_finalize_request() called with NGX_OK, resulting in
r->main->count not being decremented, thus causing request hang in some
rare situations.
See here for more details:
http://mailman.nginx.org/pipermail/nginx-devel/2012-May/002190.html
Patch by Yichun Zhang (agentzh).
The following code resulted in incorrect escaping of uri and possible
segfault:
location / {
rewrite ^(.*) $1?c=$1;
return 200 "$uri";
}
If there were arguments in a rewrite's replacement string, and length was
actually calculated (due to duplicate captures as in the example above,
or variables present), the is_args flag was set and incorrectly copied
after length calculation. This resulted in escaping applied to the uri part
of the replacement, resulting in incorrect escaping. Additionally, buffer
was allocated without escaping expected, thus this also resulted in buffer
overrun and possible segfault.
Padding was incorrectly ignored on end request, empty stdout and stderr
fastcgi records. This resulted in protocol desynchronization if fastcgi
application used these records with padding for some reason.
Reported by Ilia Vinokurov.
Failing to do so results in problems if 400 or 414 requests are
redirected to fastcgi/scgi/uwsgi upstream, as well as after invalid
headers got from upstream. This was already fixed for proxy in r3478,
but fastcgi (the only affected protocol at that time) was missed.
Reported by Matthieu Tourne.
On internal redirects this happens via ngx_http_handler() call, which is
not called on named location redirect. As a result incorrect write handler
remained (if previously set) and this might cause incorrect behaviour (likely
request hang).
Patch by Yichun Zhang (agentzh).
The proxy module context may be NULL in case of filter finalization
(e.g. by image_filter) followed by an internal redirect. This needs
some better handling, but for now just check if ctx is still here.
The problem occured if first uri in try_files was shorter than request uri,
resulting in reserve being 0 and hence allocation skipped. The bug was
introduced in r4584 (1.1.19).
Previous (incorrect) behaviour was to inherit ipv6 rules separately from
ipv4 ones. Now all rules are either inherited (if there are no rules
defined at current level) or not (if there are any rules defined).
Such upstreams cause CPU hog later in the code as number of peers isn't
expected to be 0. Currently this may happen either if there are only backup
servers defined in an upstream block, or if server with ipv6 address used
in an upstream block.
Note that "ctxt->loadsubset = 1" previously used isn't really correct as
ctxt->loadsubset is a bitfield now. The use of xmlCtxtUseOptions() with
XML_PARSE_DTDLOAD is believed to be a better way to do the same thing.
Patch by Laurence Rowe.
POSIX doesn't require it to be defined, and Debian GNU/Hurd doesn't define
it. Note that if there is no MAX_PATH defined we have to use realpath()
with NULL argument and free() the result.
The problem was introduced in 0.7.44 (r2589) during conversion to complex
values. Previously string.len included space for terminating NUL, but
with complex values it doesn't.
The bug in question is likely already fixed (though unfortunately we have
no information available as Apple's bugtracker isn't open), and the
workaround seems to be too pessimistic for modern versions of Safari
as well as other webkit-based browsers pretending to be Safari.
- Removed "hash" element from ngx_http_header_val_t which was always 1.
- Replaced NGX_HTTP_EXPIRES_* with ngx_http_expires_t enum type.
- Added prototype for ngx_http_add_header()
- Simplified ngx_http_set_last_modified().
This resulted in a disclosure of previously freed memory if upstream
server returned specially crafted response, potentially exposing
sensitive information.
Reported by Matthew Daley.
Embedded perl module assumes there is a space for terminating NUL character,
make sure to provide it in all situations by allocating one extra byte for
value buffer. Default ssi_value_length is reduced accordingly to
preserve 256 byte allocations.
While here, fixed another one byte value buffer overrun possible in
ssi_quoted_symbol_state.
Reported by Matthew Daley.
It wasn't enforced for a long time, and there are reports that people
use up to 100 simultaneous subrequests now. As this is a safety limit
to prevent loops, it's raised accordingly.
Previous code incorrectly assumed that nodes with identical keys are linked
together. This might not be true after tree rebalance.
Patch by Lanshun Zhou.
To completely disable symlinks (disable_symlinks on)
we use openat(O_NOFOLLOW) for each path component
to avoid races.
To allow symlinks with the same owner (disable_symlinks if_not_owner),
use openat() (followed by fstat()) and fstatat(AT_SYMLINK_NOFOLLOW),
and then compare uids between fstat() and fstatat().
As there is a race between openat() and fstatat() we don't
know if openat() in fact opened symlink or not. Therefore,
we have to compare uids even if fstatat() reports the opened
component isn't a symlink (as we don't know whether it was
symlink during openat() or not).
Default value is off, i.e. symlinks are allowed.
Nuke NGX_PARSE_LARGE_TIME, it's not used since 0.6.30. The only error
ngx_parse_time() can currently return is NGX_ERROR, check it explicitly
and make sure to cast it to appropriate type (either time_t or ngx_msec_t)
to avoid signedness warnings on platforms with unsigned time_t (notably QNX).
Now redirects to named locations are counted against normal uri changes
limit, and post_action respects this limit as well. As a result at least
the following (bad) configurations no longer trigger infinite cycles:
1. Post action which recursively triggers post action:
location / {
post_action /index.html;
}
2. Post action pointing to nonexistent named location:
location / {
post_action @nonexistent;
}
3. Recursive error page for 500 (Internal Server Error) pointing to
a nonexistent named location:
location / {
recursive_error_pages on;
error_page 500 @nonexistent;
return 500;
}
