Image sharpness, as well as brightness, are a critical parameter for
accuracte camera calibration. For accessing these parameters for
filtering out problematic calibraiton images, this method calculates
edge profiles by traveling from black to white chessboard cell centers.
Based on this, the number of pixels is calculated required to transit
from black to white. This width of the transition area is a good
indication of how sharp the chessboard is imaged and should be below
~3.0 pixels.
Based on this also motion blur can be detectd by comparing sharpness in
vertical and horizontal direction. All unsharp images should be excluded
from calibration as they will corrupt the calibration result. The same
is true for overexposued images due to a none-linear sensor response.
This can be detected by looking at the average cell brightness of the
detected chessboard.
Changes:
* UMat for blur + rotate resulting in a speedup of around 2X on an i7
* support for boards larger than specified allowing to cover full FOV
* support for markers moving the origin into the center of the board
* increase detection accuracy
The main change is for supporting boards that are larger than the FOV of
the camera and have their origin in the board center. This allows
building OEM calibration targets similar to the one from intel real
sense utilizing corner points as close as possible to the image border.
* add cv::compare test when Mat type == CV_16F
* add assertion in cv::compare when src.depth() == CV_16F
* cv::compare assertion minor fix
* core: add more checks
* enable tests for DNN_TARGET_CUDA_FP16
* disable deconvolution tests
* disable shortcut tests
* fix typos and some minor changes
* dnn(test): skip CUDA FP16 test too (run_pool_max)
* Handle det == 0 in findCircle3pts.
Issue 16051 shows a case where findCircle3pts returns NaN for the
center coordinates and radius due to dividing by a determinant of 0. In
this case, the points are colinear, so the longest distance between any
2 points is the diameter of the minimum enclosing circle.
* imgproc(test): update test checks for minEnclosingCircle()
* imgproc: fix handling of special cases in minEnclosingCircle()
G-API: Tutorial: Face beautification algorithm implementation
* Introduce a tutorial on face beautification algorithm
- small typo issue in render_ocv.cpp
* Addressing comments rgarnov smirnov-alexey
* Eltwise::DIV support in Halide backend
* fix typo
* remove div from generated test suite to pass CI, switching to manual test...
* ensure divisor not near to zero
* use randu
* dnn(test): update test data for Eltwise.Accuracy/DIV layer test
