* Fix NN resize with dimentions > 4
* add test check for nn resize with channels > 4
* Change types from float to double
* Del unnecessary test file. Move nn test to test_imgwarp. Add 5 channels test only.
Actually, we can do this in constant time. xofs always
contains same or increasing offset values. We can instead
find the most extreme value used and never attempt to load it.
Similarly, we can note for all dx >= 0 and dx < (dwidth - cn)
where xofs[dx] + cn < xofs[dwidth-cn] implies dx < (dwidth - cn).
Thus, we can use this to control our loop termination optimally.
This fixes#16137 with little or no performance impact. I have
also added a debug check as a sanity check.
* Handle det == 0 in findCircle3pts.
Issue 16051 shows a case where findCircle3pts returns NaN for the
center coordinates and radius due to dividing by a determinant of 0. In
this case, the points are colinear, so the longest distance between any
2 points is the diameter of the minimum enclosing circle.
* imgproc(test): update test checks for minEnclosingCircle()
* imgproc: fix handling of special cases in minEnclosingCircle()
* imgproc: Prevent 1B overrun of 8C3 SIMD optimization
The fourth value read via v_load_q is essentially ignored,
but can cause trouble if it happens to cross page boundaries.
The final few iterations may attempt to read the most extreme
elements of S, which will read 1B beyond the array in most
aligment cases. Dynamically compute the stop. This could be
hoised from the loop, but will require a more extensive change.
Likewise, cleanup the iteration increment statements to make
it more obvious they do channel count (3) elements per pass.
This should resolve#16137
* imgproc(resize): extra check
* resize: HResizeLinear reduce duplicate work
There appears to be a 2x unroll of the HResizeLinear against k,
however the k value is only incremented by 1 during the unroll. This
results in k - 1 duplicate passes when k > 1.
Likewise, the final pass may not respect the work done by the vector
loop. Start it with the offset returned by the vector op if
implemented. Note, no vector ops are implemented today.
The performance is most noticable on a linear downscale. A set of
performance tests are added to characterize this. The performance
improvement is 10-50% depending on the scaling.
* imgproc: vectorize HResizeLinear
Performance is mostly gated by the gather operations
for x inputs.
Likewise, provide a 2x unroll against k, this reduces the
number of alpha gathers by 1/2 for larger k.
While not a 4x improvement, it still performs substantially
better under P9 for a 1.4x improvement. P8 baseline is
1.05-1.10x due to reduced VSX instruction set.
For float types, this results in a more modest
1.2x improvement.
* Update U8 processing for non-bitexact linear resize
* core: hal: vsx: improve v_load_expand_q
With a little help, we can do this quickly without gprs on
all VSX enabled targets.
* resize: Fix cn == 3 step per feedback
Per feedback, ensure we don't overrun. This was caught via the
failure observed in Test_TensorFlow.inception_accuracy.
Improving VSX performance of integral function
* Adding support for vector get function on VSX datatypes so the
integral function gains a bit of performance.
* Removing get as a datatype member function and implementing a new HAL
instruction v_extract_n to get the n-th element of a vector register.
* Adding SSE/NEON/AVX intrinsics.
* Implement new HAL instruction v_broadcast_element on VSX/AVX/NEON/SSE.
* core(simd): add tests for v_extract_n/v_broadcast_element
- updated docs
- commented out code to repair compilation
- added WASM and MSA default implementations
* core(simd): fix compilation
- x86: avoid _mm256_extract_epi64/32/16/8 with MSVS 2015
- x86: _mm_extract_epi64 is 64-bit only
* cleanup
* Convert moments in tile algorithms to HAL (1.3x faster for VSX).
* Adding NEON code back in for non 64-bit platforms.
* Remove floats from post processing.
- move TLS & instrumentation code out of core/utility.hpp
- (*) TLSData lost .gather() method (to dispose thread data on thread termination)
- use TLSDataAccumulator for reliable collecting of thread data
- prefer using of .detachData() + .cleanupDetachedData() instead of .gather() method
(*) API is broken: replace TLSData => TLSDataAccumulator if gather required
(objects disposal on threads termination is not available in accumulator mode)
* Adding support for vectorized masking for uchar/ushort.
* Fixing bug where mask was zeroing the dst. Improved the way to calculate
the mask and tweaked for further performance improvements.
* Fixing mask comparison test.
* Restricting to one channel.
* Adding support for 3 channels, switch old approach to start using HAL's
v_select.
