* [OpenGL] Fix lib files copy when VCPKG_BUILD_TYPE is set
Signed-off-by: Vitalii Koshura <lestat.de.lionkur@gmail.com>
* Change from release -> "release" in CMake if
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
* improvement: has oatpp package
* [oatpp] includes _CRT_SECURE_NO_WARNINGS compile-time flag
* [oatpp] no curl submodule (until it catches up with core)
* [oatpp] now version 0.19.11. Still no libretls module because of libretls3.0 dependency.
* no accidentally added debug messages in vcpkg_execute_build_process.cmake
* [oatpp] no empty depends line in CONTROL file
* [oatpp] no dump_variables() function in portfile.cmake
* [oatpp] no wwrning that only static libraries are supported
* [oatpp] uses vcpkg_check_linkage(ONLY_STATIC_LIBRARY) call
* [oatpp] curl submodule does not rely on pkg-config
* [oatpp] curl-submodule-no-pkg-config-in-vcpkg works on linux and windows
* [oatpp] portfile cleaned up
* [oatpp] no carriage returns in patch
* [oatpp]: split modules into their own ports
* [oatpp-libressl]: remove variable dump
* [libressl]: has check for UWP and ARM restored
* [libressl]: has check for UWP and ARM restored
* [libressl]: has check for UWP and ARM restored
* [oatpp-libressl]: builds if libressl works
* [oatpp]: version 1.0.0
* [oatpp]: no "Building ..." message
Co-authored-by: heymamd1 <Michael.Heyman@jhuapl.edu>
* Initial commit
* Add missing files
* Add patchfile
* UWP Builds not supported
* Fix Linux version
* Removed 'include(vcpkg_common_functions)' as it is no longer needed
* Implemented proposed changes to portfile.cmake
* Further changes to portfile.cmake
* Added indicator that a failure is expected for arm64
* Added the expected failure on arm64 to ci.baseline.txt
* Combined two separate vcpkg_fail_port_install() calls
* Use upstream version compatible with opentracing 1.6
* Added 'Supports:' entry in CONTROL to signal missing arm64 support and removed vcpkg_fail_port_install() for UWP in portfile.cmake
Co-authored-by: xgcssch <soenke.schau@alte-leipziger.de>
* [eigen3] Fix generated pkgconfig files
* [ignition-cmake2] Update to C++ library
Now ignition-cmake also installs a C++ library, so
it is possible to remove code specific for CMake-only ports.
* [ignition-modularscripts] Fix pkgconfig files installed by ignition libraries
Use the new function vcpkg_fixup_pkgconfig to fix the installed .pc pkgconfig files
of the ignition libraries.
As ignition-fuel-tools1 depends on curl that has a broken pkg-config file, disable
installation of its pkg-config files.
* Added patch to add find_dependency() for suitesparse targets downstream
Should address / closemicrosoft/vcpkg#7556
* Bumped port version to -7
* Removed patch that uses vcpkg features for suitesparse and added
suitesparse detection logic in CeresConfig.cmake.in
* Changed configure options to detect features using `vcpkg_check_features()`
* Passed `${FEATURE_OPTIONS}` to `vcpkg_configure_cmake()`
* Updated zydis portfile.cmake
Fixed issue with Zycore includes being in the wrong place.
* Increase zydis package version number
* Change version to fit CONTROL spec
* [libpng] Fix missing symbols when compiling for ARM
* [libpng] create src directory when it's not exists
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
* [vtk-m] new port vtk-m
* [VTK] Update to 9.0
* include local buildtree changes
* [pcl] disable VTK due to API changes in VTK 9.0
* [vtk-m] add supports field to be only x64
* [vtk-dicom] add python executable.
* fix vtkm dependency
* [vtk-dicom] fix missing std:: namespace
* [vtk-m] add uwp to unsupported triplets
* [vtk] add pegtl include patch, reenable IOMotionFX
* remove hdf5 changes for testing
* use different pgetl patch which redirects to the installed config of pegtl
* [pegtl-2] version file needs renaming too
* [vtk] change dependency to pgetl-2 and fix the patch
* [vtk] put in hdf5 fix again and correct manually installed include files
* remove deprecated function to retrigger CI
* [lz4] correctly lowercase the lz4 config
* [vtk] remove unnecessary code
* [pegtl-2] add homepage
* [pegtl] modernize portfiles
* [vtk-dicom] add homepage
* [vtk-dicom] modernize portfile
* [vtk-m] remove empty build depends
* [vtk] try fixing the permission issue
* bump control
* Update FindHDF5.cmake
* Update pegtl.patch
* Update ports/vtk/pegtl.patch
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
* [vtk] refactor portfile, added a few deps on [core] and added feature cuda
* [vtk] pegtl.patch: Add additional found message
* [vtk-m] add more documentation comments
* [vtk] fix string replacement
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
* [vcpkg] Bump Linux VM memory size and do all operations on the temporary disk.
* [llvm] disable optional dependencies to libxml2 and zlib
* [vcpkg] Reduce quotas on the share to something reasonable.
* [mpir] Skip on Linux because it conflicts with libgmp.
Co-authored-by: yurybura <yurybura@gmail.com>
* [uthenticode] Add new port
* ports/uthenticode: Add openssl as a dependency
* ports/uthenticode: 1.0.1
* ports/uthenticode: 1.0.2
* ports/uthenticode: Drop quotes
* treewide: Mark uthenticode as failing on UWP
* ports/uthenticode: Use ${PORT}
* Changed dependency on qt5 to qt5-base, closesmicrosoft/vcpkg#11138
* Bump the correct control file.
* Also added qt5-base as dep for opencv3, bumped version
* Changed dep for `qt` feature from `qt5` to `qt5-base`, bumped ver
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* add new function vcpkg_fixup_pkgconfig
* make message with changed files a debug_message
* add two more cases to the debug *.pc files
* comment out prefix.
use --define-variable=prefix=INSTALL_PATH
* changed the comment header.
* add missing word
* finish vcpkg_fixup_pkgconfig.cmake
* Update vcpkg_fixup_pkgconfig.cmake
Note: since CMake is run in script mode the description of VCPKG_FIXUP_PKGCONFIG_CALLED cannot be viewed
* transfer changes from x windows pr
* fix typo in regex
* add port for vs yasm integration within VCPKG
* add gmp
* add nettle
* add missing windows flag in control
* CI workaround
CI seems to not pass env YASMPATH correctly to cl.
Since YASM is on PATH -> remove $(VCInstallDir) as the default for YasmPath
* overwrite correct import.
* If CI does not give logs just display some extra info
* target replacement was mising
* apply same replacements for nettle
* remove unnecessary status message
* remove unnecessary platform code
* update supports field for vs-yasm
* apply replacement also to libhogweed
* fix static builds
* remove not working code
* remove debug/release options
* add additional replacement for the case the SOURCE dir has already been patched within VCPKG
* add triplet selection to vcpkg_install_msbuild
* fix missing ; in patches
* remove gmp dependency in static builds since they are not required
* cleanup portfiles
* add missing vcpkg_fixup_pkgconfig() call
* Added new port GASol
* added patch file
* Code Refactoring
* Code Refactoring to change port name
* Updated baseline to resolve file conflicts with nanovg and stb
* Added changes to ci-baseline and added port not supported on arm/uwp
* [gasol] Use cmake to build
* update baseline
Co-authored-by: SanaJahan <sanadgrt@gmail.com>
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
As announced in https://community.gazebosim.org/t/important-gazebo-and-ignition-are-going-to-github/533,
the ignition project repositories have been migrated from BitBucket to GitHub.
This commit updates the ignition_modular_library helpers to use GitHub instead of BitBucket,
and also update the hashes of all the ignition ports as apparently the archive generated by GitHub
for releases are slightly different from the one generated by BitBucket.
* Add rtlsdr port
* Update ci.baseline.txt
* Update to use github mirror in portfile.cmake
Co-authored-by: Egor Chesakov <echesakov@users.noreply.github.com>
* [OpenCV2] add library for older C projects
* [OpenCV2] fixes for non-Windows systems
* [OpenCV2] add warnings for Ubuntu
* add fixes for cuda
* [OpenCV2] disable parallel building, otherwise cuda fails
* [OpenCV2] refresh port with latest fixes
* [OpenCV2] fix CONTROL
* [OpenCV2] fixes for windows
* [OpenCV2] fixes to avoid unnecessary install of pre-built ffmpeg, since it already uses externally provided one
* [OpenCV2] openexr still has some problems, explicitly removed UWP support
* [OpenCV2] use targets wherever possible. Jasper and OpenEXR features would require improvements in those ports, in order for them to provide targets too
* [OpenCV2] re-enable parallel build also with CUDA
* [OpenCV2] improve compatibility with CUDA 10+
* [OpenCV2] fix broken CUDA targets
* [darknet] enable opencv2 feature
* skip from building, like opencv3, to avoid problems in CI
* [libmpeg2] Add new port
Libmpeg2 seems to be a somewhat old project, last release was done in
2008, but it is still in use by some projects e.g. ResidualVM
I have verified the mpeg2dec built for x86-64 with MSVC produces similar
results as the one pre-packaged on my Arch.
* [libmpeg2] Apply review comments
* [libmpeg2] Add ci.baseline.txt exemptions
* Allow the apr port to be used on non-windows systems
* Allow the apr-util port to be used on non-windows systems
* Allow the apr-util port to be used on non-windows systems
* Allow the apr-util port to be used on non-windows systems
* [log4cxx] add new port
* Add aarch64 cross compilation support
* Allow apr and apr-util ports to used with a cross compiling tool chain
* @PhoebeHui requested changes
* Remove files that leaked from 'add-log4cxx-port' branch
* @PhoebeHui requested changes
* Move apr-util-unix and apr-util-windows portfile.cmake content back into apr-util/portfile.cmake
* Use the same released archive for unix and windows
* Use the same released archive for unix and windows (1.6.1)
* Update APR version to the latest
* Prevent unrelated CI failures
* Prevent CI failure for arm64 on x86 CI machine
* Prevent CI failure for arm64 on x86 CI machine
* Use vcpkg_configure_make and vcpkg_install_make instead of vcpkg_execute_required_process
* Remove shared libraries if a static build
* Revert "Remove shared libraries if a static build"
This reverts commit 540e158e1fbfe53b889bef8b928bc8feb62775c2.
* Prevent CI failures due to static build installing apr-1-config into bin
* @PhoebeHui requested changes
Co-authored-by: Stephen Webb <stephen.webb@sabreautonomous.com.au>
* [discord-game-sdk] new port
* [discord-game-sdk] Invert Supports field
* [discord-game-sdk] Fix Supports field
* [discord-game-sdk] Fix Supports field again
* [discord-game-sdk] Update find_library
* [discord-game-sdk] Rename LICENSE.md, remove include(vcpkg_common_functions)
* [discord-game-sdk] Fix Linux build, add usage file
* [discord-game-sdk] Add missing file(INSTALL)
* [discord-game-sdk] Update baseline and fix macOS build
* [discord-game-sdk] Specify C++ standard version
* [discord-game-sdk] Remove vcpkg_copy_pdbs
* [discord-game-sdk] Replace ToS text by link to online version
* [ace] Update to 6.5.8
* Address review comments
* ports/ace/portfile.cmake:
* Put back copy step
* ports/ace/portfile.cmake:
* Fixed error
* ports/ace/portfile.cmake:
* ARM should work, let us try it
* ports/ace/portfile.cmake:
* ARM doesn't work yet, so disable it again
* ports/ace/portfile.cmake:
* Add support for vcpkg of ace on MacOSX
* ports/ace/portfile.cmake:
* [ace] Update to 6.5.9 and removed fail check for ARM, when a new vs2019 is available with the compiler check that should work again
* ports/ace/CONTROL:
* ports/ace/portfile.cmake:
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [llvm] Update to version 10.0.0 and new features
* switch to llvmorg-10.0.0-rc3, allow to use bin directory for tools
* Fix CMake targets after vcpkg_fixup_cmake_targets call.
* [halide] Update to master version to support LLVM 10
* [halide] fix x64-osx build
* [llvm] add enable-assertions feature
* [llvm] fix comment
* [llvm] enable ci for x64-linux and x64-osx
* [llvm] update to v10.0.0-rc5
[llvm] disable assertions and ABI breaking checks by default
[llvm] limit the maximum number of concurrent link jobs to 1
[llvm] add postfix `d` and debug shared libraries in the `/bin` directory
* [llvm] revert debug postfix `d`
[llvm] don't remove debug version of tools and shared libs
* [llvm] fix debug tools path
* [llvm] update to release tag llvmorg-10.0.0
[llvm] build with CMAKE_DEBUG_POSTFIX=d
[llvm] remove debug binaries
* remove new CMake argument FOLLOW_SYMLINK_CHAIN
* [llvm] force TableGen to be built with optimization
* [llvm] add future disable-clang-static-analyzer
* [llvm] add futures for main targets
[llvm] remove utils and clang-tools-extra from default features list
[llvm] exclude tests
* [llvm] add features for main targets
[llvm] remove utils and clang-tools-extra from default features list
[llvm] exclude tests
* [llvm] update features description
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* [vcpkg] Add new function vcpkg_copy_tools
* [cpuinfo][czmq][nanomsg][uriparser] Use vcpkg_copy_tools
* [czmq] Clean even tools are not copied
[libsvm][zyre] Use vcpkg_copy_tools
* [vcpkg-copy-tools] Clean debug/bin
This should fix czmq build error
* [czmq] czmq does not have BUILD_TOOLS option
* [vcpkg] Split clean logic into another function
* [cpuinfo][czmq][nanomsg][uriparser] Fix calling of vcpkg_copy_tools
* [zyre] Fix regression error
* [vcpkg] Update try_remove_empty_directory
* [libsvm] Fix vcpkg_copy_tools call
* [imgui] Separate feature tools from feature example
* [imgui] Separate feature tools from feature example
Co-authored-by: JackBoosY <yuzaiyang@microsoft.com>
* [mstch] add new port
* [mstch] update sha512 code
* [mstch] don't build in some window environment
* [mstch] remove some args which were no longer needed
* [mstch] Patch out forcing build type
* [mstch] Restore C++11 on non-Windows
* [ci.baseline.txt] Mark mstch as passing on x64-windows-static
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* [alembic] make the portfile linux-compatible
* [alembic] fix build error in debug on linux
* [alembic] simplify renaming of copyright file
* [alembic] code simplification and formatting
* [alembic] update version to 1.7.12-1
* [alembic] linux build does not fail anymore
Adds a patch changing macros in absl/base/options.h to
always use the std:: namespace types instead of the
absl:: namespace replacements (for any, optional,
string_view, variant).
The upstream version of options.h uses compiler/library
feature detection to decide this, but patch
fix-lnk2019-error.patch hard codes use of absl:: types,
thus rendering setting CMAKE_CXX_STANDARD to 17 in the
port file ineffective. Since auto detection is problematic
from an ABI point of view (see comments in
absl/base/options.h for details), this applies an
alternate patch for fix-lnk2019-error.patch when feature
cxx17 is enabled.
* [libqcow] Add new port
Signed-off-by: Alexandro Sanchez Bach <alexandro@phi.nz>
* [libqcow] fix build
Co-authored-by: Alexandro Sanchez Bach <asanchez@kryptoslogic.com>
* [armadillo] Add dependent port superlu on osx
* [armadillo] Suppress automatic dependency enablement
* [mlpack] Re-enable in CI
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
This is required so that qt5-tools is not skipped in CI which affects CI coverage.
In general Qt5 ports should not be build apart from each other but as complete package!
Or VCPKG should accept installing duplicated *.dll in every folder excebt for /bin or debug/bin
* Update egl-registry to 2020-02-20 and opengl-registry to 2020-03-25
* opengl-registry: remove extra includes that
* egl-registry, opengl-registry: add Homepage
* egl-registry, opengl-registry: remove includes, use
* [pe-parse] Add new port
* pe-parse/CONTROL: Fix version, remove dep
* pe-parse/portfile: Formatting
* pe-parse/CONTROL: Add pe-parse's homepage
* pe-parse/CONTROL: Don't support UWP
This isn't a platform pe-parse intends to support.
* Add initial version of libttommath port
* Add initial version of libtomcrypt port
* Remove unnecessary EXTRALIB flag.
* Remove deprecated include(vcpkg_common_functions)
* Add homepage to CONTROL file
* Update license copying in portfile
* [libtommath] make build for non-windows
* [libtomcrypt] make build for non-windows
* [libtomcrypt] update ci baseline
* [libtomcrypt] set HEAD_REF to upstream dev branch
* [libtommath] set HEAD_REF to upstream dev branch
* [libtomcrypt] Correct CFLAGS and include path
* [libtommath][libtomcrypt] Lowercase 'debug' folder. Tweak CRT flags. Use VCPKG_CONCURRENCY.
* [libtomcrypt] Remove x64-windows-static=fail from the ci baseline
Co-authored-by: Frederik Juul <frederik.juul@3shape.com>
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* make qt5 all features and add the missing qt modules
* fix control
* qt5 webengine enviromnent setup
* copy qtminimal plugin to tools
* add opengles3 option for testing
* [qt5-imageformats] freeglut is not a dependency on osx
* [qt5-base] fontconfig can require iconv on linux and osx
* include the jasper fix to get CI coverage?
* trying to get ci coverage for qt on osx
* Revert "trying to get ci coverage for qt on osx"
This reverts commit 8b9b188839.
* apply the correct ci hack
* fix wrapper to include macosx debug suffix
* update baseline
* first try to fix the Qt5 cmake configs at the root.
* fix missing backslash
* fix plugin patch
* fix qt config patch
* remove 90% of fixcmake.py
* update baseline
* experimental removal of fixcmake.py and dll copying into tools/qt5/bin
* fix experimental dll copying.
* fix static windows builds
* fix static builds
* fix plugin copy
* add quotes around configuration to make it work
* remove dll debug messages
* note about the cmake fix
* revert fontconfig changes on linux. Make qt.conf relative and not absolute
* make qt.conf relative
* trying to fix ogre osx ci regression
* fix silly path error
* Revert "trying to fix ogre osx ci regression"
This reverts commit 708d8250d6.
* add ogre:x64-osx=fail to CI baseline
* retry on osx
* fix configure error. since in qt5-base everything is in the package directory and not in the installed
* revert change to ci.baseline
* update ci baseline
* update Qt Control fields
* update qt hashes to 5.12.7
* update baseline
update missing hashes
update empty include/packages
add info for placeholder ports not yet correctly working (e.g. qt5-wayland)
* fix linux qt targets not having debug properties.
* remove most of the wrapper
* actual forgot to commit the prl parser
* fix the config a bit differently. have to check linux configs again
* add xlib patch.
* make qt-base fail to get logs on linux
* Need logs from qt5-base
* update versions I missed
* ws change
* lets see if this is enough to make qt5-x11extras happy
* add upstream patch.
* add newline to patch
* ws change to trigger rebuild and maybe get logs on osx failure
* need generated cmakescripts to check linkage.
* rename cmake files to end on .log so that i can inspect them after CI failure
* fix patch
* make qt run
* androidextras only supports android
* qt5-doc will only be build on linux
* ws ci trigger due to download failure
* WS to retrigger CI due to download failure
* add code for debug tools
* lets see if we can do it with only the release tools
* update baseline
* fix create link error on linx
* update baseline
* revert changes which tried to use release tools only
* fix dependencies
* add debug qt.conf
* add another copyright install
* qtdoc does not have any include files
* fix wrong copy pasta
* update latest port hashes.
* make the patches versions dependent
* cleanup qt5 control a bit
* update qt5-base control for ci run to use latest
* fix patches for latest
* forgot to commit the portfile changes
* fix imageformat dependencies for latest qt
* update last hash
* fix translations dependencies
* get cmake scripts from CI
* new patch for creating correct configs
* patch precompiled headers away from qt5-webengine
* fix patch for 5.12.7. (Patch was for 5.14.1)
* trigger CI rebuild
* add simple gl path to fix the chormium build error
* comment out debug message from prl parser
* bump control
* update webengine control
* update CI to skip webengine.
* update baseline
* ws change to osg-qt
* remove kd-soap from faillist
* reset ci baseline to upstream/master
* update baseline
* fix osg-qt?
* skip ms-angle on osx and linux since the normal angle port should be used!
* update ci baseline
* try adding fontconfig manually
* update ci baseline to remove osg-qt for the time being
* remove manual library.
* remove wrapper and get plugin info also from linux and osx
* allow build of complete qt
* fix missing parameter in populate plugin.
* need more info from CI
* fix foreach CI loop
* comment out CI code colllection to make a full qt5 ci run
* fix qt5-imageformats regression on linux
* update baseline
* - add patch to find the debug library
- manually fix EGL path in Qt5GuiConfigExtras.cmake
* bump control
* update hashes to 5.14.2
* comment out messages for debugging
* bump version in control
* fix create cmake patch
* add qtmain path corrections for single configuration build.
* fix escaping of . in regex
* remove one to many \\
* remove latest as a default feature
* reenable messages to debug osg-qt issue on osx.
* small cmake options details.
might need to patch cmakelists.txt if this is not working
* remove unnecessary comment
* make prl parser silent again.
* remove canvas3d from the default features since it has been deprecated and will be removed in the future
* fix some remaining absolute paths.
* update qt to 5.12.8
* deactivate qt update script
* removed merged patch
* remove a trailing ws and fix the mqtt hash which was missing before
* revert some ws changes
* fix version numbers in qt5 metaport
* [boost-modular-build-helper] Support Clang --target=<value> syntax to enable Android builds (#10091)
* [boost-modular-build-helper] Updating to version 1.72.0-2
* re-trigger ci test
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
* [coroutine] update to 1.5.0
* this is release candidate
* WindowsStore build will be updated soon
* [coroutine] support UWP build
* triplet(community) `x64-uwp`, `x86-uwp`
* triplet: `arm-uwp`, `arm64-windows`
* [coroutine] mark install failure on uwp/linux
* update checksum
* use `vcpkg_fail_port_install`
* [coroutine] remove x86-windows fail in ci.baseline
* [coroutine] Relax install restrictions on Linux. Use vcpkg_fixup_cmake_targets().
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* [cppcoro] add new port
* [cppcoro] update with PR review
* update reference to tag and hash value
* ${PORT} for destination
Linux build support should marked unavailable?
* [cppcoro] embed CMakeLists.txt file
* copy the CMakeLists.txt file and start build with it
* change version to 2020.2
For now the repo doesn't have any tags.
Therefore its version followed the latest commit,
which is made in 2020 Feb.
* [cppcoro] 2020-02-28
* [cppcoro] port install failure on platforms
* vcpkg_fail_port_install on uwp/linux
mention PR #10693 so linux/clang users can see the port issues
* [cppcoro] force static linkage
* report error for clang-cl
build with VC++ in VS 2019 will fail by the header file.
* [cppcoro] register ci.baseline failure
* [cppcoro] Simplify CMakeLists.txt to ease future maintenance. Fix VS 2019 builds.
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
The vcpkg port of websocketpp has been pointing to the upstream commit
1c699ce of a PR, in order to fix build issues of websocketpp 0.8.1 with
boost 1.70 (#6141). This fix has been merged upstream in the meantime
and is part of the release 0.8.2 now.
- Update to WebSocket++/0.8.2 release
- Remove deprecated include(vcpkg_common_functions)
- Use ${PORT} instead of websocketpp
* minimum to compile on linux
* Update as reviewed
* Update baseline and add the condition to execuate script
* Move find_program and make it REQUIRED
* always execute generate command
* only use make in find_program
Co-authored-by: Nancy Li (Beyondsoft Corporation) <v-ruil@microsoft.com>
* [Quill] Add new port
* Mark port as unsupported for uwp/arm/arm64 and update ci.baseline
* Mark uwp, arm and arm64 as ignored in ci.baseline
* fix alphabetical order in ci.baseline
* Remove duplicate from ci.baseline
* Invert supports expression in CONTROL
* Mark as skip in ci.baseline
* Address review comments
* Bump version to 1.2.1
* add vcpkg_fail_port_install
* use vcpkg_from_github and simplify feature options
* fix file alignment
* Always depend on fmt
* Libzip updated to rel-1-6-1
* [libzip] Add windows_crypto feature
The new BCrypt/CNG-based crypto uses BCryptDeriveKeyPBKDF2 which is only
available since WinNT 6.1. It is important to me as a consumer of libzip
through vcpkg to be able to turn this off.
* Additional options added.
* Common Crypto supported as an option for encryption backend.
Co-authored-by: Michał Janiszewski <janisozaur+signed@gmail.com>
* make qt5 all features and add the missing qt modules
* fix control
* qt5 webengine enviromnent setup
* copy qtminimal plugin to tools
* add opengles3 option for testing
* [qt5-imageformats] freeglut is not a dependency on osx
* [qt5-base] fontconfig can require iconv on linux and osx
* include the jasper fix to get CI coverage?
* trying to get ci coverage for qt on osx
* Revert "trying to get ci coverage for qt on osx"
This reverts commit 8b9b188839.
* apply the correct ci hack
* fix wrapper to include macosx debug suffix
* update baseline
* first try to fix the Qt5 cmake configs at the root.
* fix missing backslash
* fix plugin patch
* fix qt config patch
* remove 90% of fixcmake.py
* update baseline
* experimental removal of fixcmake.py and dll copying into tools/qt5/bin
* fix experimental dll copying.
* fix static windows builds
* fix static builds
* fix plugin copy
* add quotes around configuration to make it work
* remove dll debug messages
* note about the cmake fix
* revert fontconfig changes on linux. Make qt.conf relative and not absolute
* make qt.conf relative
* trying to fix ogre osx ci regression
* fix silly path error
* Revert "trying to fix ogre osx ci regression"
This reverts commit 708d8250d6.
* add ogre:x64-osx=fail to CI baseline
* retry on osx
* fix configure error. since in qt5-base everything is in the package directory and not in the installed
* revert change to ci.baseline
* update ci baseline
* update Qt Control fields
* update qt hashes to 5.12.7
* update baseline
update missing hashes
update empty include/packages
add info for placeholder ports not yet correctly working (e.g. qt5-wayland)
* fix linux qt targets not having debug properties.
* remove most of the wrapper
* actual forgot to commit the prl parser
* fix the config a bit differently. have to check linux configs again
* add xlib patch.
* make qt-base fail to get logs on linux
* Need logs from qt5-base
* update versions I missed
* ws change
* lets see if this is enough to make qt5-x11extras happy
* add upstream patch.
* add newline to patch
* ws change to trigger rebuild and maybe get logs on osx failure
* need generated cmakescripts to check linkage.
* rename cmake files to end on .log so that i can inspect them after CI failure
* fix patch
* make qt run
* androidextras only supports android
* qt5-doc will only be build on linux
* ws ci trigger due to download failure
* WS to retrigger CI due to download failure
* add code for debug tools
* lets see if we can do it with only the release tools
* update baseline
* fix create link error on linx
* update baseline
* revert changes which tried to use release tools only
* fix dependencies
* add debug qt.conf
* add another copyright install
* qtdoc does not have any include files
* fix wrong copy pasta
* update latest port hashes.
* make the patches versions dependent
* cleanup qt5 control a bit
* update qt5-base control for ci run to use latest
* fix patches for latest
* forgot to commit the portfile changes
* fix imageformat dependencies for latest qt
* update last hash
* fix translations dependencies
* get cmake scripts from CI
* new patch for creating correct configs
* patch precompiled headers away from qt5-webengine
* fix patch for 5.12.7. (Patch was for 5.14.1)
* trigger CI rebuild
* add simple gl path to fix the chormium build error
* comment out debug message from prl parser
* bump control
* update webengine control
* update CI to skip webengine.
* update baseline
* ws change to osg-qt
* remove kd-soap from faillist
* reset ci baseline to upstream/master
* update baseline
* fix osg-qt?
* skip ms-angle on osx and linux since the normal angle port should be used!
* update ci baseline
* try adding fontconfig manually
* update ci baseline to remove osg-qt for the time being
* remove manual library.
* remove wrapper and get plugin info also from linux and osx
* allow build of complete qt
* fix missing parameter in populate plugin.
* need more info from CI
* fix foreach CI loop
* comment out CI code colllection to make a full qt5 ci run
* fix qt5-imageformats regression on linux
* update baseline
* - add patch to find the debug library
- manually fix EGL path in Qt5GuiConfigExtras.cmake
* bump control
* update hashes to 5.14.2
* comment out messages for debugging
* bump version in control
* fix create cmake patch
* add qtmain path corrections for single configuration build.
* fix escaping of . in regex
* remove one to many \\
* remove latest as a default feature
* reenable messages to debug osg-qt issue on osx.
* small cmake options details.
might need to patch cmakelists.txt if this is not working
* remove unnecessary comment
* make prl parser silent again.
* remove canvas3d from the default features since it has been deprecated and will be removed in the future
* remove ws change
* remove newline and ws
* trigger ci test
* revert 199a3ef92f
* add messages to qt5-webengine and adjust baseline
* add jpeg and zlib to JASPER_LIBS
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
* [ace] Update to 6.5.8
* Address review comments
* ports/ace/portfile.cmake:
* Put back copy step
* ports/ace/portfile.cmake:
* Fixed error
* ports/ace/portfile.cmake:
* ARM should work, let us try it
* ports/ace/portfile.cmake:
* ARM doesn't work yet, so disable it again
* ports/ace/portfile.cmake:
* Add support for vcpkg of ace on MacOSX
* ports/ace/portfile.cmake:
* [ace] ACE should work now on ARM
* ports/ace/portfile.cmake:
* [ace] OSX should work now
scripts/ci.baseline.txt:
* ARM doesn't work yet, visual studio 2019 is broken for the moment
* ports/ace/portfile.cmake:
* Increment version of ace
* ports/ace/CONTROL:
* [ryml] Add new port
* Remove deprecated include
* Fix ver regarding maintainer guide
* Mark port as unsupport arm/arm64/osx
* Update CI baseline
* Replace deprecated func vcpkg_extract_source_archive,
add PREFER_NINJA to conf
* Fix wrong placed port states
* Resolve merge conflict
* [sdformat6] Migrate from Bitbucket to GitHub
As announced in https://community.gazebosim.org/t/important-gazebo-and-ignition-are-going-to-github/533,
the sdformat repository has been migrated from Bitbucket to GitHub.
This commit also updates the hash as apparently the archive generated by GitHub is slightly different
from the one generated by Bitbucket.
* Cleanup of sdformat6 port
* Commit to fixup
* [xerces-c] Update to version 3.2.3
Drop patch no-symlinks-in-static-build.patch (fixed upstream)
* [xerces-c] Correct version number
* [xerces-c] Remove no-symlinks-in-static-build.patch
* [c4core] Add new port
* Remove deprecated include
* Fix ver regarding maintainer guide
* Mark port as unsupport arm/arm64
* Update CI baseline
* Mark port as unsupport OSX
* Update CI baseline
* Fix path to header instead of moving
Signed-off-by: vvandrounik <vvandrounik@gmail.com>
* Replace deprecated func vcpkg_extract_source_archive, add PREFER_NINJA to conf
* [SDL2] Update to 2.0.12 version
* [sdl2] Change homepage link to the official sdl website
* [sdl2] Remove no longer used patch
* [sdl2] Remove no longer used patch
* [sdl2] Fix patches files
* [avisynthplus] Add new port
* [avisynthplus] Disable static build
Static build is not supported. See https://github.com/AviSynth/AviSynthPlus/issues/130
* [avisynthplus] Ass Supports to CONTROL
* [avisynthplus] set static to fail in CI baseline
* [avisynthplus] add vcpkg_fail_port_install
* [realsense2] Add tm2 feature for support T265 devices
* Fix tools build error on Visual Studio 2019
* Update the way to handle features as vcpkg_check_features()
* Update
* Fix building avro-c in Linux
* Increment version
* Declare Linux is supported
* Updated CI baseline
Co-authored-by: Michael Spector <spektom@gmail.com>
* Add iOS community triplets and toolchain support
Added an iOS toolchain to enable building packages for iOS.
The toolchain is used when a triplet's VCPKG_CMAKE_SYSTEM_NAME is set
to iOS.
To configure which architecture should be built, as well as other
iOS specifics, the following triplet variables can be set:
- VCPKG_TARGET_ARCHITECTURE
- VCPKG_OSX_SYSROOT
- VCPKG_OSX_DEPLOYMENT_TARGET
- VCPKG_OSX_ARCHITECTURES
The following VCPKG_TARGET_ARCHITECTURE values are currently
supported:
- arm, arm64, x64, x86.
The following VCPKG_OSX_SYSROOT values are currently supported:
- iphoneos, iphonesimulator, or an absolute path to the device or
simulator Xcode SDK.
VCPKG_OSX_DEPLOYMENT_TARGET can be set to control the minimum iOS
delopyment target for the built libraries.
CMAKE_OSX_ARCHITECTURES is derived from VCPKG_TARGET_ARCHITECTURE,
so generally it should not be set. In case if someone needs to target
a more specific architecture (like armv7k or arm64e), it can
be set in the triplet via VCPKG_OSX_ARCHITECTURES.
Note that only certain combinations of the architecture and sysroot
will work: simulator SDKs only provide x86-based libraries, etc.
The toolchain also sets CMAKE_SYSTEM_PROCESSOR for certain
configurations, because certain packages (like libpng) depend on the
processor type.
Added 4 community iOS triplets that build static libraries:
- arm-ios, arm64-ios, x86-ios, x64-ios.
The non-arm triplets target the iOS simulator.
The triplets build static libraries because they are easiest to
integrate into an iOS project. Dynamic libraries or frameworks require
code signing on iOS, which complicates integration.
Added heuristics to try and automatically detect what iOS triplet to
use when building your own CMake project (so when a CMake project sets
CMAKE_TOOLCHAIN_FILE to buildsystems/vcpkg.cmake), if no explicit
triplet is provided (VCPKG_TARGET_TRIPLET is undefined).
The heuristic checks for the values of CMAKE_SYSTEM_NAME and
CMAKE_OSX_ARCHITECTURES. Note that for this to work,
CMAKE_OSX_ARCHITECTURES needs to be set before the first project()
call in your CMake project.
Added workaround so find_package finds vcpkg installed packages
when targeting iOS.
This is done by saving / restoring the value of CMAKE_FIND_ROOT_PATH
while also adding the vcpkg package root in the find_package override
macro.
The workaround can be removed once vcpkg upgrades to CMake 3.15.0
or higher where the issue is fixed.
Fixes: #6003
* Fix building libpng and pcre2 targetting iOS
Fixes: #6003
* [boringssl] Add new port
* removed usage of deprecated vcpkg functions
* let the ci treat boringssl like libressl
* applied requested changes
* [boringssl] Update to commit 590265773@2020-04-07 (#8455)
* [boringssl] Restore scripts/ci.baseline.txt
* copy the CMakeLists.txt file and start build with it
* change version to 2020.2
For now the repo doesn't have any tags.
Therefore its version followed the latest commit,
which is made in 2020 Feb.
* [qt5-imageformats] freeglut is not a dependency on osx
* [qt5-base] fontconfig can require iconv on linux and osx
* include the jasper fix to get CI coverage?
* trying to get ci coverage for qt on osx
* Revert "trying to get ci coverage for qt on osx"
This reverts commit 8b9b188839.
* apply the correct ci hack
* fix wrapper to include macosx debug suffix
* update baseline
* first try to fix the Qt5 cmake configs at the root.
* fix missing backslash
* fix plugin patch
* fix qt config patch
* remove 90% of fixcmake.py
* update baseline
* experimental removal of fixcmake.py and dll copying into tools/qt5/bin
* fix experimental dll copying.
* fix static windows builds
* fix static builds
* fix plugin copy
* add quotes around configuration to make it work
* remove dll debug messages
* note about the cmake fix
* revert fontconfig changes on linux. Make qt.conf relative and not absolute
* make qt.conf relative
* trying to fix ogre osx ci regression
* fix silly path error
* Revert "trying to fix ogre osx ci regression"
This reverts commit 708d8250d6.
* add ogre:x64-osx=fail to CI baseline
* retry on osx
* fix configure error. since in qt5-base everything is in the package directory and not in the installed
* revert change to ci.baseline
* update ci baseline
* bump control
* update baseline
* ws change to osg-qt
* reset ci baseline to upstream/master
* update baseline
* fix osg-qt?
* skip ms-angle on osx and linux since the normal angle port should be used!
* update ci baseline
* try adding fontconfig manually
* update ci baseline to remove osg-qt for the time being
* remove manual library.
* add mirror for mpfr at gnu.org
* remove deprecated include(vcpkg_common_functions)
* update version number after modified port
* update copyright handling command to install
* fix configure meson for non windows builds.
* change to the two ports using meson
* fix passing of empty compiler arguments.
* dont transform / into - for all flags
* copy meson logs into the buildtree to better diagnose CI errors of meson ports
* another change to the two ports to actually force a CI rebuild
* add missing /pkgconfig dir to PKG_CONFIG_PATH
* fix pkgconfig setup
* add share/pkgconfig to PKG_CONFIG_PATH
* Add CMake path to PATH for meson
* add share folder to prefix for meson
* remove double message
* add libdir so that meson does not install into architecture folder in linux
and make prefix path target dependent. (Or should it be host dependent?)
* bump controls
* update toolchain selector to use VCPKG_TARGET_IS_<paltform>.
* change pkgconfig prefix and path.....
meson is not correctly handling native windows paths and eating "\"
PKG_CONFIG_PATH also nees : to correctly separate paths
Prefix still must be near to native path but with / instead of \ C:/somepath/
* [libffi] Support arm/arm64
* [libffi] Use VCPKG_TARGET_ARCHITECTURE to determine triplet
* [libffi] Use VCPKG_TARGET_ARCHITECTURE in CMakeLists.txt
* update baseline
* re-trigger ci test
* Added port for Skyr URL library
* Removed vcpkg_test_cmake call in skyr-url port
* Fixed type in version number, added step to copy PDBs
* Added build dependency on tl-expected
* Removed commented out code
* Disabled warnings as errors
* Bumped version number
* Updated version number for Skyr URL
* [openvr] Added Linux support
* [openvr] Updated to v1.10.30
* [openvr] Updated port file with modern variables and better platform checking
* [openvr] Updated ci.baseline.txt as Linux is supported now
* [magnum] Update patches for --head builds
Signed-off-by: Squareys <squareys@googlemail.com>
* [magnum-plugins] Remove obsolete patch
Since basisu port has been updated, we can now use it without patching
the magnum-plugins code for compatibility.
Signed-off-by: Squareys <squareys@googlemail.com>
* [corrade] Remove obsolete warning and flag
Signed-off-by: Squareys <squareys@googlemail.com>
* [magnum] Rename patches to reflect order of application
Signed-off-by: Squareys <squareys@googlemail.com>
* [corrade/magnum/magnum-plugins] Update port versions
Signed-off-by: Squareys <squareys@googlemail.com>
* [ffmpeg] Disable vdpau in UNIX
* [ffmpeg] Disable vdpau in OSX only
* [freerdp] Add warning message when building in non-windows
* revert 1ec7785491 changes
* re-trigger ci test
* [kealib] Switch repo to github
* [mongo-c-driver] Set icu as a feature
* [monkeys-audio] Update version to 5.24
* [mongo-c-driver] Fix arm build
* [mongo-c-driver] Re-generate patch
* [mongo-c-driver] Remove key word PRIVATE in patch
* [llvm] Remove default feature tools
* [llvm] Add judgment to install tools
* [llvm] Add more condition
* [llvm] Fix clang cmake files when selecting feature tools
* [halide] Fix build depends info in CONTROL
* update baseline
* Add NVIDIA Codec support for Windows, Linux and Linux for Tegra
* [ffnvcodec] Fix typos, add/remove comments
* Bump nvcodec version to 9.1.23.1
* Update version number as per change request
* Use PORT variable instead of hardcoded portname
* Identify the release the hash pertains to
* Find nvcodec in 'installed' instead of 'packages'
* Force FFmpeg to look for nvcodec headers in the installed directory instead of /usr/lib/pkgconfig.
* Use p option on cygpath to convert full path in case it contains more than one entry
* [cpprestsdk] Disable websockets by default.
The websockets backend cpprestsdk uses is websocketpp, which was last
committed to in late 2018 and appears defunct. Additionally, the
websockets feature brings an otherwise unnecessary Boost dependency on
Windows which takes a relatively long time to build.
Customers who still want the websockets bits can turn on the optional feature.
* Add dependency to signalr.
* [spirv-headers] Update to version 1.5.1
* [spirv-tools] Update to version 2020.1
* [spirv-tools] Work around an import config typo
* [spirv-tools] Fix nitpicks
* [spirv-headers] Modernize port
* [spirv-tools] Fix directory name capitalization mismatch
* [mimalloc] Update to 1.6.0
* Update patch
* Update ci baseline file
* Add message for the arch and platform that doesn't support
* Update the ci baseline file
* Update to latest revision 1.6.1
* [grpc][openssl][upb] Fix install on uwp
* [upb] Remove unneeded changes
* [libodb-mysql] Disable parallel configure due to source writes
* [curl] Use openssl for UWP since SSPI is unsupported
* [ci.baseline] Update
* [sqlpp11-connector-mysql] Add Homepage to CONTROL file
* [sqlpp11-connector-mysql] Update to version 0.29
* [sqlpp11-connector-mysql] Remove deprecated function from portfile
* [libgit2] Add features to build against vcpkg pcre,pcre2
* version
* libgit2 will automatically link to 'system' zlib, which is inconsistent depending on if vcpkg zlib was installed or not. This rectifies this by always targeting vcpkg zlib
* Add "pthreads" feature to mbedtls.
* Cleanup portfile.
* Fix mbedtls pthreads support for Linux.
* [mbedtls] Require the pthreads port only on Windows.
* [mbedtls] Work around dependency issues about static linking.
* Enable compiling SuiteSparse DLLs
Generated dynamic libraries work ok when linked to other projects.
* [suitesparse] Refresh port file for new vcpkg
* Update CONTROL file.
* Fix mhook build error.
* Removed the following entries from scripts/ci.baseline.txt: mhook:x64-windows=fail, mhook:x64-windows-static=fail, and mhook:x86-windows=fail.
* Removed unnecessary lines from fix-windows-packing-mismatch.patch.
* ignition-modularscripts: move CMake config files only if necessary
Some ignition libraries (such as ignition-cmake2) already install the
CMake config file in the location required by vcpkg
* Add new port ignition-cmake2
* [zkpp] Add new port
* [zkpp] Change name of underlying library
* [zookeeper] Fix interface include directories
* [zkpp] Sanity
* Fix patch
* Correctly expose include directories
* Bump version
* Explicitly fail on Windows
Co-authored-by: Raed Romanov <raid_r@mail.ru>
* Update tinyfiledialogs to download from archive
I have additionally messaged the original maintainer about a fixed-version download, so we will finally have some consistent building of this package.
* Update ci.baseline.txt
* Update CONTROL
* Update portfile.cmake
* Change download path to be version specific
* Download Path now plain
* Change position of Supports tag
* Update package version
* Update portfile.cmake
Update portfile to download to a specified archive version name.
* [abseil] Add uwp support
* [abseil] Drop support with arm/arm64
* [opencensus-cpp] Add keyword supports
* update baseline
* [abseil] Enable arm support
* [skia] add new port
* [skia] add support for x64-windows
* [skia] use vswhere to locate MSVC
* [skia] update supports CONTROL field
* [skia] address review comments
* [skia] add compile definitions for metal
* [skia] use vcpkg to find programfiles
* [skia] add glob_single_file function
Update google-cloud-cpp-common to v0.21.0, google-cloud-cpp to v0.20.0,
and google-cloud-cpp-spanner to v0.9.0. These changes need to be atomic,
thus the single PR.
* [zydis] Update to v3.0.0
Since v3.0.0 now depends on the internal zycore library via a submodule, I had to replace `vcpkg_from_github` with `vcpkg_download_distfile`
* [zydis] Switch to vcpkg_from_github
* Update Zydis to v3.1.0
Also, set `ZYDIS_ZYCORE_PATH` instead of moving the Zycore sources.
* [boost-python] Try to fix build issue on Linux
* Update baseline: enable boost-python:x64-linux
* Fix number of processor detection on Linux: use CMake module
* Fix user-config.jam configuration on Linux
* Update baseline: enable boost-mpi:x64-linux
* Fix build boost-regex[icu] on Linux, issue #4962
* [fmt] Update to 6.1.2
* [spdlog] add patch to fix include missing
* [fmt] check if file exists before file(RENAME ...)
* [spdlog] bump version to 1.4.2-2
* [fmt][spdlog] Fix version number
* [libmysql] Apply patch to prevent configuration error in extra/re2
Configuration of the embedded extra/re2 produces an error on Mac with Clang:
CMake Error at extra/re2/CMakeLists.txt:74 (ADD_COMPILE_FLAGS):
Unknown CMake command "ADD_COMPILE_FLAGS".
cmake/compile_flags.cmake was not included.
* [libmysql] Remove empty directory /lib/plugin/debug after installation
* [libmysql] Update version to 8.0.4-6
* [libmysql] Remove deprecated include(vcpkg_common_functions)
* [libmysql] x64-osx is now expected to pass CI
* [libmysql] Simplify copying of copyright file
* [libmysql] Handle unsupported triplets with vcpkg_fail_port_install
* [jsoncons] Update to v0.145.0
* Update to v0.145.1
* Removed blank lines at end of .cmake file. Update to v0.145.2
* [jsoncons]Line include(vcpkg_common_functions) removed
* Fix osx baseline
* fix osg configure issue
* re-trigger ci test
* re-trigger ci test
* [osg] Revert changes with osg and temporarily skip osg detection
* trigger ci test
* update baseline
Co-authored-by: Phoebe <20694052+PhoebeHui@users.noreply.github.com>
* [rxspencer] Add RxSpencer port
* No need to force dynamic linkage
* Review comments
* update baseline
* Update to latest upstream
* Review comments
* Update CONTROL
Co-authored-by: NancyLi1013 <46708020+NancyLi1013@users.noreply.github.com>
* [ace] Update to 6.5.8
* Address review comments
* ports/ace/portfile.cmake:
* Put back copy step
* ports/ace/portfile.cmake:
* Fixed error
* ports/ace/portfile.cmake:
* ARM should work, let us try it
* ports/ace/portfile.cmake:
* ARM doesn't work yet, so disable it again
* ports/ace/portfile.cmake:
* Some package fixes necessary to build with MinGW toolchain
* [libraqm] Fix build error caused by trying to write to source directory
* [tmxparser] Fix build failure when tmx port is intalled before tmxparser port
System include path was added first on compiler command line. This leads to
build failure when there is a tmx.h header file in system include path.
* [qt5-base][angle] Trigger CI rebuild
* [kd-soap] Fix build error
* Update ci.baseline
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* [open62541] Update to v1.0
* Remove dependency on python-six
* Fix CI
* Manually specify the version
* Fix install binaries directory
* Fix end line
* Add homepage and modernize cmake
* libffi 3.3-rc0 custom port, with arm/arm64 windows support
* fix linux build
* enable EFI64 in linux x64, should fix build errors in some cases
* libffi: move to the arm64 support pr branch
* libffi: move to latest upstream master
* libffi: update to upstream master
* libffi: update to v3.3-rc2
* libffi: update to v3.3 release
* libffi: update version in fficonfig.h
* libffi: Remove CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS
* [libffi] update portfile.cmake
* [libnice] fix Windows ARM64 build
* CI: set atk:arm64-windows to fail
atk compilation requires running glib(arm64) tools, which is not possible on a x86 system.
* CI: libffi:arm64-windows passing
* [gdk-pixbuf] fix Windows ARM64 build
* [pangomm] show unsupported architecture error on ARM
* [pangomm] update portfile.cmake
* [libffi] Avoid depending on VCPKG_TARGET_TRIPLET; use native cmake variables instead. Avoid double expansion inside if().
* [libffi] TARGET is a keyword for if() -- use quoted expansion instead.
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* update nngpp version
fixed correct handling of copyright/licences
removed deprecated command
* prettify versioning
* replace tag with corresponding commit id
* fix SHA512
* update nng to the latest version
necessary in order for nngpp to work correctly
added homepage
removed deprecated command
fixed handling copywright
* prettify versioning
* replace tag with SHA1 of corresponding commit
* fix SHA512
* fix 7426 issue
* fix 7426 issue -change the CONTROL file
* [liblzma] Remove quantlib:x64-os from ci.baseline.txt
* [liblzma] Update the CONTROL version
* [EAThread][EASTL] Added EAThread and modified EASTL
EABase has now also been seperated from EASTL.
EASTL now copies CommonCppFlags.cmake as it is used by EAThread.
* Fix EABase
* Fix EABASE include for EASTL
* Improve EASTL
Still need to fix
The /debug/lib/cmake folder should be merged with /lib/cmake into /share/eastl
Found 3 error(s). Please correct the portfile:
E:\vcpkg\ports\eastl\portfile.cmake
-- Performing post-build validation done
Error: Building package eastl:x64-windows-static failed with: POST_BUILD_CHECKS_FAILED
Please ensure you're using the latest portfiles with `.\vcpkg update`, then
submit an issue at https://github.com/Microsoft/vcpkg/issues including:
Package: eastl:x64-windows-static
Vcpkg version: 2019.09.12-nohash
* Base pass one Thread
* Fix config errors and add `vcpkg_fixup_cmake_targets`
* Add required changes for fails
* x86-windows should also fail
* Revert adding `vcpkg_fail_port_install(ON_TARGET "Windows" ...)`
* Remove `eastl:arm64-windows=fail` from ci.baseline.txt
* Merge CONTROL descriptions into one line
* remove unfinished "supports" tag
* extract "supports" from control files
But do nothing with the value
* Start `Supports` documentation
* Use Supports in a bunch of control files
I only tried matching the already existing logic in the portfile.cmake.
* Cmake var provider (#8)
* Cmake var provider (#9)
* fix windows build (#10)
* Add missing files to build
* Fix test (#11)
* adding hooks for cmake variables in expressions
* Adding hooks for 'supports' in CI test
* Fix test (#12)
* Add overrides to evaluation environment
* use "supported" tag in CI testing
* cleanup comment
* Fix issues with PR
* [var_provider] Get library linkage variables from triplet
* Fix compilation errors in tests
* Add unimplemented functions
* Fix unit tests part 1
* Fix issue when buildtrees dir does not exist
* Change binary output hash
* Fix handling of * feature
* Add core feature when using *
* Do not add Default-Features when installing 'core'
* [vcpkg] WIP. 6 failing tests.
* [vcpkg] WIP. 1 failing tests.
* [vcpkg] WIP. 0 failing tests.
* [vcpkg] Removed 'remove_graph'. 0 failing tests.
* [vcpkg] Removed 'install_graph'. 0 failing tests.
* [vcpkg] Remove AnyAction; replace with ActionPlan
* [vcpkg] Minor cleanup.
* [vcpkg][z3][qt5-connectivity][qt5-purchasing] Improve error messages while parsing. Fix a few trivial port issues.
* [vcpkg] Work around ICE with MSVC v140
* [vcpkg] Add purge on fail to decompress for CI
* [vcpkg] Fix parsing of nested parentheses in qualifiers
* [vcpkg] Fix Linux builds (explicit qualification in declaration)
* [vcpkg] Fix Build-Depends implying default features. Fix qualified dependencies regression.
* [mmx] Add to skip list and full rebuild -- mmx causes problems by installing 'sched.h'
* [libpqxx][mqtt-cpp] Prevent installing include/CMakeLists.txt
* [cppitertools] Fix installed include namespace (should be include/cppitertools)
* [libsoundio] Move headers into soundio/ subdirectory as per original cmake
* [ci.baseline] Temporarily skip charls due to conflict with dcmtk
* [vcpkg] Add restricted include files post build check -- bump global abi version
* [libsoundio] Hotfix stray line in portfile
* [vcpkg] Fix regression: CMake information was not being displayed for build-and-install actions
* [jsonnet] Fix installation of internal headers; use system nlohmann-json
* [grpc][upb] Teach grpc to use packaged upb. Add find_package(upb). Remove inappropriate upb features.
* [zfp] Move problematic 'include/bitstream.h' to 'include/zfp/bitstream.h'
* [x265] Bump control version to trigger rebuild after zfp conflict
* [akali] Disable parallel configure
* [dirent][dlfcn-win32][getopt-win32][pthreads] Grandfather into VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [ci.baseline] Update baseline for improved upb support
* [tgui] Disable parallel configure
* [libiconv] Enable VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [aws-sdk-cpp] Disable parallel configure
* [vcpkg] Implement policy VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [aws-sdk-cpp] Fix amount of escaping semicolons -- Note: I do not know the root cause requiring this change
* [libodb-sqlite] Fix configuring into source directory
* [gettext] Grandfather into VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [libodb] DISABLE_PARALLEL_CONFIGURE
* [vcpkg] Add 'config.h' and 'local.h' to restricted header list
* [mcpp] Remove unused and problematic include 'config.h' from installed files
* [teemo] Move installed headers into subdirectory to prevent conflicts with x265
* [ci.baseline] Update current OSX. Skip libmesh on all platforms due to heavy conflicts.
* [vcpkg] Add 'slice.h' as a restricted header
* [osg] Improve accuracy of dependencies (disable some, add some to Depends)
* [vcpkg] Skip invoking a subprocess for 0 specs in load_tag_vars
* [ci.baseline] Skip mongo-c-driver on osx due to flakiness
* [teemo] Fix incorrect include file read
* [osg] Fix dependency typo: glut -> freeglut
* [vcpkg] Recover some lost performance with the addition of vcpkg_get_tags.
A huge performance cost was loading the triplet files over and over; instead, we splice the sources into a macro and load it once, then just call that macro for each port.
Remove use of hashing because we aren't cross-process-safe anyway (global static will do instead).
* [vcpkg] Change Supports atom 'windows' to include UWP. Improve Supports field documentation.
* [vcpkg] Add docs for VCPKG_ENV_PASSTHROUGH and VCPKG_DEP_INFO_OVERRIDE_VARS
* Fix typo
Co-authored-by: Curtis J Bezault <curtbezault@gmail.com>
Co-authored-by: Victor Romero <romerosanchezv@gmail.com>
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* Azure-IoT-Sdk for C release 2020-01-22
* [azure-c-shared-utility] Patch conditionals in azure_c_shared_utilityFunctions.cmake
Co-authored-by: Victor Romero <romerosanchezv@gmail.com>
* [aws-c-common]Upgrade to 0.4.15
* [aws-c-common]Fix cmake target path.
* [aws-c-event-stream]Upgrade to 0.1.4
* [aws-checksums]Upgrade to 0.1.5
[aws-c-event-stream]Fix cmake target path.
[aws-lambda-cpp]Upgrade to 0.2.4
[aws-sdk-cpp]Upgrade to 1.7.214
* [aws=sdk-cpp]Set feature AWSMigrationHub to lowercase.
* [aws-lambda-cpp] Drop support with OSX
* Update eigen3's portfile to use new gitlab repo
The official GitHub mirror at https://github.com/eigenteam/eigen-git-mirror is deprecated and soon will be removed.
* Bump eigen3's version
* Update eigen3's homepage
* Update hash
* Add Microsoft SEAL as a new port
* Fix to choose either static or shared binaries
* Fix to fail port install on Windows platforms
* Fix to enable a command line build on windows
* Fix to fail port install on UWP
* [gsl-lite] Update to version 0.36.0
Update the URL to point to the new location of the library.
Use proper CMake installation instead of just deploying the header file.
Have the legacy header <gsl-lite.hpp> produce a diagnostic and forward
to the proper header <gsl/gsl-lite.hpp>.
* [telnetpp] Update telnetpp patch
* Tidy up
* [loguru] extend to generate proper binary on linux
* Update the changes
* Update CMakeLists.txt
* Remove CMAKE_CXX_LINK_FLAGS
* Add find_dependency(Threads) to config file
* Update jsoncpp 1.9.2
Using implicit int to float conversion is fixed from jsoncpp 1.9.2 version.
* Update Control
update jsoncpp 1.9.2
* remove deprecated function
include(vcpkg_common_functions)
* [jsoncpp] Allow disabling examples
Co-authored-by: Victor Romero <romerosanchezv@gmail.com>
* [restclient-cpp]: correct the way to remove debug/include
* [restclient-cpp] Only support static build on Windows.
* [restclient-cpp] Bump version
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* [sdl2-mixer] Fix dynamic loading when building static library
* [sdl2-mixer] Set dynamic load as a feature
* [sdl2-mixer] Disable feature dynamic-load when building static
* Add sfsexp, S-expressions library
* Use CMakeLists.txt directly instead of patching it
* Use sub-folder for sfsexp header files
* Manually set the header files and make sure the resulting include/ folder is the same as with the autotools installation
* Add runtime parameter for the DLL
* Export all symbols in the DLLAA
* Use PUBLIC_HEADER property install of install(FILES...)
* Remove boilerplate comments from portfile
* Only create static library on windows
* Throw error on UWP
* Disable some windows UWP warnings
* Use VCPKG_TARGET_IS_WINDOWS and put it on top of file
* Deleted extra blank lines
* Missed one blank line
* Use ${PORT} variable instead of the specific "sfsexp" string.
This should make it easier to change the name of the port later on.
* Use vcpkg_from_github to fetch the release.
* Remove extra empty lines
* [asiosdk] Add new port
* specified vcpkg_fail_port_install for non-windows platforms
* specified vcpkg_fail_port_install for arm & uwp platforms
* added entries for asiosdk into scripts/ci.baseline.txt
* bugfix for [ftgl] build failure #9520. Applied same solution as cbezault did for #7697
* bugfix for [ftgl] build failure #9520. Added suggested changes from the review and clean-up EOL characters.
* [ftgl] remove ftgl:x64-linux=fail from ci.baseline.txt
* [ftgl] build failure #9520 - disable doxygen on Linux
* [ftgl] build failure #9520 - force the compiler to use the C++11 standard
* [ftgl] build failure #9520 - remove ftgl:x64-osx=fail
* [ftgl] build failure #9520 - add missing C++11 standard patch
* [memorymodule] Add new port
* [memorymodule] Update ci baseline
* [memorymodule] Update CI baseline
* [memorymodule] Simplify vcpkg_fail_port_install call
* [memorymodule] Install lib files only if they exist
* Added portfile and control
* Added patch file to support MSVC
* Added description for msgpack11 in CONTROL
* added homepage to Control, code refactoring for portfile
* refactored portfile
* made align changes
* Update portfile.cmake
* Update CONTROL
removed v from the version
* added ref properly
Co-authored-by: Mayank Kataruka <37381526+mayankkt9@users.noreply.github.com>
* [anyrpc] Updated to latest commit
Updated to latest commit and removed patch, as it
is no longer needed.
* [anyrpc] Updated to latest commit
Removed deprecated `include(vcpkg_common_functions)`.
* [open62541] Update to v1.0
* Remove dependency on python-six
* Fix CI
* Manually specify the version
* Fix install binaries directory
* Fix end line
* Add homepage and modernize cmake
* enable ssl feature on selected under linux
* Complete implementation of ACE's installtion method under Linux
* reorder code logic structure of ACE's portfile
* add some debug log for ACE's portfile
* Bump tweak version of ACE CONTROL file
* fix invalid CL error for build/install perl scripts under Linux
* [ace] replace vcpkg_execute_required_process with vcpkg_execute_build_process
* [xerces-c] Update REF and SHA512
* [sfml] re-trigger ci
* [pcl] re-trigger ci
* [boost-signals] re-trigger ci
* [tmxparser] re-trigger ci
* [soil2] switch repo to github
* [gtest] re-trigger ci
* Fix tinyfiledialogs not being fetchable from sourceforge
Fix tinyfiledialogs not being fetchable from sourceforge. Use github instead.
* Update CONTROL
* Update portfile.cmake
* Update portfile.cmake
Update source url
* Update CONTROL
* added cleanup command to embree3 port for static build
* updated CONTROL file with version tag
* check if file exists before cleanups
* fix baseline
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
* [boost-python] Support Python2 as feature, fix build with installed Python2
* [boost-python] Update generate script to support Python2 mod
* Re-generate boost ports
* [boost-modular-build-helper] Update to 1.71.
[boost-build] Update to 1.71.
* [boost-modular-build-helper] Remove manual library name changing
[boost-iostreams] Use boost-modular-headers.cmake script
* Delete temporary file.
* Revert changes in modular build script.
* Update ports versions.
* [boost-modular-build-helper] Fix build boost-iostreams with LZMA and ZSTD
* [boost] Update to 1.72.0
* [libtorrent] Fix build with Boost 1.72.0
Original PR: https://github.com/arvidn/libtorrent/pull/4091
* Update ci.baseline.txt:
- fail libgo:* due to use the removed class from Boost.Context 1.72.0 (reported issue https://github.com/yyzybb537/libgo/issues/214)
- pass boost-context:arm64-windows
- fix typo
* Folly only supports the x64 architecture
* fail boost-coroutine:arm64-windows=fail and boost-fiber:arm64-windows=fail because they use fcontext_t from Boost.Context which is not implemented for Windows on ARM64 (reported issue https://github.com/boostorg/context/issues/130)
* Fix globbing-expressions
* Add vcpkg_buildpath_length_warning(37) for boost-system.
Revert boost-iostreams port changes.
* Update ci.baseline.txt
* fixes to get vcpkg up and running when behind corporate proxy
* clean up of code to check if HTTP_PROXY environment variable is set
* fixed compiler errors for non win32 systems
* [vcpkg] Simplify HTTPS_PROXY code for WinHTTP
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
Use write_basic_package_version_file() to create the
libffiConfigVersion.cmake file.
This allows detection of the libffi version using cmake.
An example, where this is relevant is e.g. glib 2.62, with the
following code in meson.build:
libffi_dep = dependency('libffi', version : '>= 3.0.0',
fallback : ['libffi', 'ffi_dep'])
When the libffiConfigVersion.cmake file is present, the following output
can be found in the meson-build.log:
Run-time dependency libffi found: YES 3.1
* [ports] Update openssl-unix to 1.1.1c
* [ports] Update openssl-unix to 1.1.1d
* [ports] openssl-unix platform 'AMD64' is called 'x86_64' on Linux
* [ports] fix openssl platform
* [ports] openssl-windows update openssl to 1.1.1d
* [ports] Fix openssl post build
* [ports] openssl add EnableUWPSupport.patch
Reference:
https://github.com/openssl/openssl/pull/8917https://github.com/openssl/openssl/pull/9440
* [ports] openssl-uwp update openssl to 1.1.1d
* Updated support for OpenSSL v1.1
With OpenSSL v1.1 we need an additional flag for ACE
* update to 12.0 and change to vcpkg_configure_make
* remove msys line
* remove custom cmakelists
* use --without-readline on linux
* Update CONTROL
Fix version
* fix portfile
* add all possible libpq features
* create vcpkg_get_build_depends
* create vcpkg_read_dependent_port_info
* add vcpkg_write_port_info
* fix a few bugs
* libpq first succesful x86 build with core features.
(files still must be moved)
* always write the variable
* Fix separate make and install execution error issue.
* trigger CI system.
* add openssl and win_bison win_flex patch
* add configuration dependent patches
* add bonjour as a dependency on macosx
* apply patches and configure features
* more patches to fix the windows build
* more install fixes
* remove unnecessary code
* bit of code cleanup
* remove unrelated files
* remove unrelated function call. function was removed with last commit
* removed hardcoded platform
* fix patch
* build only the interface libraries and nothing more
* forgot to remove tool ecpg from install
* seperate minimal install patch from normal install patch and introduce client feature
* fix x86 Platform variable being x86 and not Win32 as required by the generated project
* make linux build work
* make more linux work
* openssl return version number directly without calling openssl
(should probably be done differently)
* fix some more path and platform identification
* comments to reduce install. currently libpq installs static and shared libraries and some tools on linux
* patch arm
* fix platform detection logic
* make libpq osx buildable
* Rename debug import library after build.
(So that we don't affect external CMake users.)
* revert debug naming and install a wrapper instead.
* fix gdal regression due to name change
* fix cutelyst regression due to qt5-base wrapper
(why was it not using the target in the first place?)
* correct wrapper install path
* correct the arm patch.
* trying to fix static gdal build
* gdal still needs more work
* update version of openssl in libpq openssl patch
* nmap fix openssl
* qt5 fix openssl
* gdal fix openssl
* librtmp migrate to openssl 1.1.1
* fail in patch since what is intended is not going to work in openssl 1.1.1
* fix static yara build
* freedtds deactivate openssl feature until freetds decides to upgrade to 1.1
* fix libwebsockets cmakelists
* fix the patch so that the generated targets also include crypt32
* xmlsec add threads dependency
* bump control since I am unable to reproduce the regression
* add pthread to openssl detection logic
* fix freetds linkage missing crypt32 and fix the cmake checks.
* fix the openssl wrapper to add the threads library
* fix libmysql regression
* add threads to openssl libraries.
* upgrade libssh to 0.9
* fix nmap regression
* fix mosquitto regression
* fix openssl wrapper to make libarchive work
* fix quickfix
* changed patch a bit
* improve freetds patch
* fix case in librtmp
* update control
* bump control
* fix case
* make jasper a dependency of qt5-imageformats to fix flaky CI build.
* add jasper libraries explicitly
* jasper depends on freeglut so add it as a dependency. turbo_jpeg is also a dependency but that should already be handled in qt5-base
* more glut names
* bump control for macosx ci retry
* fix slikenet regression
* fix linebreak in qt5-base
* update baseline
* Update ci.baseline.txt
those ports are not supported on UWP
* [libevent] add dependency on libevent[threads] to openssl feature
* [pdal,freerdp] Update CI baseline to fail
* fix static pdal build
* fix freerdp on linux
* trying to revert some changes
* revert changes in build make
* revert x264 version bump
Co-authored-by: Force Charlie <6904176+fcharlie@users.noreply.github.com>
Co-authored-by: Johnny Willemsen <jwillemsen@remedy.nl>
Co-authored-by: Lennart Trunk <lennart.trunk@outlook.de>
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
Co-authored-by: Victor Romero <romerosanchezv@gmail.com>
* fix netcdf configure errors and generated targets
* remove target_path
since cmake searches in name*
* bump control
* netcdf update to 4.7.3 and use targets instead of libraries in cmake
* remove config from the zlib find_dependency call
because there is no config. The target is supplied by a cmake module itself
* move usage of hdf5 target to an further up in the cmakelists.txt and use config also on linux
* fix dynamic builds
* remove code from portfile
* remove commenting from patch and simply delete the lines
* [azure-kinect-sensor] Remove feature test and fix static build in Windows
* [azure-kinect-sensor-sdk] Re-fix components install path using patch
* [azure-kinect-sensor-sdk] Remove bin debug/bin in static build
* update baseline
* [hdf5]Fix static builds when building dynamic builds.
* [hdf5]Remove duplicate code, fix zlib library name.
* [hdf5]Adapt links to different link types of szip.
* [hdf5] Fix hdf5-config.cmake.in
* [nanovg]Add depends port stb. Do not install stb headers.
* [nanovg] Remove stb files from source to ensure the vcpkg-packaged copies are preferred.
* [nanovg]Disable build with uwp.
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* Adding a port for nethost
* Fixing ref, removing unneeded include, and marking unsupported architectures for nethost
* Fixing the expected sha512 for nethost
* Setting nethost to fail on static and uwp
* Removing an unecessary file(REMOVE_RECURSE) from nethost
* update baseline
* [nethost] Update to latest from dotnet/runtime
* [vcpkg-baseline] Update baseline for nethost
* [vcpkg-baseline] Update baseline for nethost
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* [libevent] Fix include headers fails on x64-windows, using CMAKE
* [libevent] Fix conflicting file portfile.cmake
* [libevent] Update the CONTROL version
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* Fix static qt5 builds and ignore system qmake
closes#9234 and #9239
* fix angle conflict and icu dependency
* add egl-registry as a dependency
* remove space
* adding spaces resolved the problem
* move files only if they exist
* Update the Wrapper to use the Postgres target
fixes some observed linkage issues
* update baseline
* add fontconfig on linux so CI is less flaky in a full rebuild
* fix linkage dependent qt5-imageformats libs
* Fix Wrapper for Linux and add other platform libs to Qt5::Core
* fix plugin properties in cmake files
* fix cmake files.
* fix missing plugin qminimal deployment into tools dir
* change wrapper slightly
* UNIX also means APPLE so it needs to be excluded
* fix the static windows build
* mark the parts of fixcmake which require further work to work with single configuration builds
* Update ci.baseline.txt
make qt5-tools pass for CI testing
* fix last regression
* break auto fontconfig in configure script to fix qt5-tools
* update baseline
* enable verbose to debug ci
* try to help it instead of breaking it
* completly link icu
* try to fix fontconfig configure
* fix configure call. cannot be called with a list!
* remove invalid line from patch
* force icu and reduce the required icu libs according to the configure script
* fix icu linkage
* add more icu dependencies and names for windows
* add more icu libs. Seems like all are needed
* fix typo
* print icu libs in debug
* check releasenames
* try again
* change link order
* add icu to wrapper
* fix typo
* patch icu configure for static windows builds
* add other icu libraries to the icu patch
* fix icu in x64-windows-static
* update baseline. VTK builds in local WSL so it should work in CI
* update VTK control to force rebuild
* remove qt5-tools=pass from baseline
* remove qcustomplot:x64-linux=fail from baseline
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* use config and the correct alias
@Neumann-A figured out that `add_library(Freetype::Freetype ALIAS freetype)` is defined so instead of Freetype::Freetype use freetype. @qis Also pointed out that freetype uses a cmake config file. Thats why CONFIG parameter is required.
* remove usage
* bump version to 2.10.1-2
* remove faulty line after usage deletion
* [grpc] Update grpc to 1.24.0
* [grpc] Update grpc to 1.24.3
* Disable error C4146 on uwp
C4146: unary minus operator applied to unsigned type, result still unsigned
* [uvatlas] Upgrade to dec2019
* [uvatlas] Delete and update deprecated functions
* [uvatlas] x64-uwp passing, remove from ci.baseline.txt
* [uvatlas] Don't test x86-windows-static by default, remove it
* [argumentum] Add new port
* Remove testing code from portfile
* Use a new release that respects build_static_libs
- add vcpkg_check_linkage
* Use the new repository name
* Add homepage to control file
* Fix the portfile as suggested in PR #9478
* Disable some platforms as suggested in PR #9478
We will try to fix the build on these platforms in a future release.
* Use release 0.2.2 with fixed header preparation
* (wip) check which platforms are failing
* Reenable all ports for argumentum in ci.baseline
* Fix argumentum version in control file
* [charls] upgrade to 2.1.0
Upgrade to the latest released version of CharLS. The patch file has become obsolete.
* Remove charls=fail triplets from ci.baseline.txt
Both arm-uwp and x64-uwp can be build.
* [sdl2-gfx] Update CMake build and find_package support
* Update build process to more closely mimic other SDL2 extensions
* Bump CONTROL version number
* Remove uneeded wrapper file
* Remove uneeded wrapper file
* [sdl2-gfx] Simplification. Add cmake find_dependency(SDL2).
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* [abseil] Update to the latest and fix link failure for StrCat with > 4 arguments
* Remove message from vcpkg_fail_port_install
* Update lnk2019-error patch
* [vcpkg_install_qmake] Add vcpkg_install_qmake and convert existing ports to use it.
[vcpkg_configure_qmake] Add 'staticlib' to CONFIG in static builds
* [vcpkg_configure_qmake] Don't specify DESTDIR
* [libqglviewer][vcpkg_configure_qmake] Add staticlib CONFIG only for libqglviewer
* [qt5-base] Increment version to track changes in vcpkg_configure_qmake()
* [libarchive] Fix cpu_set_t missing
* [xalan-c] Fix flakiness in presense of ICU
* [openvpn3] Add missing bits/endian.h include
* [vcpkg-baseline] Mark vtk as no longer failing
* [nano-signal-slot] Update to latest version
I know that official releases should be preferred, but I used the latest commit instead because it fix an issue which was causing compilations error on the latest MSVC version (https://github.com/NoAvailableAlias/nano-signal-slot/issues/26).
* [nano-signal-slot] Fix wrong date format
* [nano-signal-slot] Version update
The developer of this library has just added a new release version including the MSVC compilation bug fix.
