Keeping post_accept_timeout in ngx_listening_t is no longer needed since
we've switched to 1 second timeout for deferred accept in 5541:fdb67cfc957d.
Further, using it in HTTP code can result in client_header_timeout being
used from an incorrect server block, notably if address-specific virtual
servers are used along with a wildcard listening socket, or if we've switched
to a different server block based on SNI in SSL handshake.
The stub status module and ngx_http_send_response() (used by the empty gif
module and the "return" directive) incorrectly assumed that responding
to HEAD requests always results in r->header_only being set. This is not
true, and results in incorrect behaviour, for example, in the following
configuration:
location / {
image_filter size;
return 200 test;
}
Fix is to remove this incorrect micro-optimization from both stub status
module and ngx_http_send_response().
Reported by Chris Newton.
After 7675:9afa45068b8f and 7678:bffcc5af1d72 (1.19.1), during non-buffered
simple proxying, responses with extra data might result in zero size buffers
being generated and "zero size buf" alerts in writer. This bug is similar
to the one with FastCGI proxying fixed in 7689:da8d758aabeb.
In non-buffered mode, normally the filter function is not called if
u->length is already 0, since u->length is checked after each call of
the filter function. There is a case when this can happen though: if
the response length is 0, and there are pre-read response body data left
after reading response headers. As such, a check for u->length is needed
at the start of non-buffered filter functions, similar to the one
for p->length present in buffered filter functions.
Appropriate checks added to the existing non-buffered copy filters
in the upstream (used by scgi and uwsgi proxying) and proxy modules.
With introduction of open_file_cache in 1454:f497ed7682a7, opening a file
with ngx_open_cached_file() automatically adds a cleanup handler to close
the file. As such, calling ngx_close_file() directly for non-regular files
is no longer needed and will result in duplicate close() call.
In 1454:f497ed7682a7 ngx_close_file() call for non-regular files was removed
in the static module, but wasn't in the flv module. And the resulting
incorrect code was later copied to the mp4 module. Fix is to remove the
ngx_close_file() call from both modules.
Reported by Chris Newton.
The ngx_http_parse_complex_uri() function cannot make URI longer and does
not null-terminate URI, so there is no need to allocate an extra byte. This
allocation appears to be a leftover from changes in 461:a88a3e4e158f (0.1.5),
where null-termination of r->uri and many other strings was removed.
When the request line contains request-target in the absolute-URI form,
it can contain path-empty instead of a single slash (see RFC 7230, RFC 3986).
Previously, the ngx_http_parse_request_line() function only accepted empty
path when there was no query string.
With this change, non-empty query is also correctly handled. That is,
request line "GET http://example.com?foo HTTP/1.1" is accepted and results
in $uri "/" and $args "foo".
Note that $request_uri remains "?foo", similarly to how spaces in URIs
are handled. Providing "/?foo", similarly to how "/" is provided for
"GET http://example.com HTTP/1.1", requires allocation.
Previously, the number of next_upstream tries included servers marked
as "down", resulting in "no live upstreams" with the code 502 instead
of the code derived from an attempt to connect to the last tried "up"
server (ticket #2096).
Similarly to the problem fixed in 2096b21fcd10 (ticket #1792),
when a "trailer only" gRPC response (that is, a response with the
END_STREAM flag in the HEADERS frame) was immediately followed by
RST_STREAM(NO_ERROR) in the data preread along with the response
header, RST_STREAM wasn't properly skipped and caused "upstream
rejected request with error 0" errors.
Observed with "unknown service" gRPC errors returned by grpc-go.
Fix is to set ctx->done if we are going to parse additional data,
so the RST_STREAM(NO_ERROR) is properly skipped. Additionally, now
ngx_http_grpc_filter() will complain about frames sent for closed
stream if there are any.
When installing or running from a non-root user it is sometimes required to
override default, compiled in error log path. There was no way to do this
without rebuilding the binary (ticket #147).
This patch introduced "-e" command line option which allows one to override
compiled in error log path.
Addon modules, both dynamic and static, can now use shared source files.
Shared sources result in only one make rule even if specified several
times in different modules.
Before introduction of request body filter in 42d9beeb22db, the only
possible return code from the ngx_http_request_body_filter() call
without actual buffers was NGX_HTTP_INTERNAL_SERVER_ERROR, and
the code in ngx_http_read_client_request_body() hardcoded the only
possible error to simplify the code of initial call to set rb->rest.
This is no longer true after introduction of request body filters though,
as a request body filter might need to return other errors, such as 403.
Fix is to preserve the error code actually returned by the call
instead of assuming 500.
Added logging before returning NGX_HTTP_INTERNAL_SERVER_ERROR if there
are busy buffers after a request body flush. This should never happen
with current code, though bugs can be introduced by 3rd party modules.
Make sure debugging will be easy enough.
When doing lingering close, the socket was first shut down for writing,
so SSL shutdown initiated after lingering close was not able to send
the close_notify alerts (ticket #2056).
The fix is to call ngx_ssl_shutdown() before shutting down the socket.
Now "s", "V", and "v" format specifiers may be prefixed with "x" (lowercase)
or "X" (uppercase) to output corresponding data in hexadecimal format.
In collaboration with Maxim Dounin.
In some cases it might be needed to reject SSL handshake based on SNI
server name provided, for example, to make sure an invalid certificate
is not returned to clients trying to contact a name-based virtual server
without SSL configured. Previously, a "ssl_ciphers aNULL;" was used for
this. This workaround, however, is not compatible with TLSv1.3, in
particular, when using BoringSSL, where it is not possible to configure
TLSv1.3 ciphers at all.
With this change, the ssl_reject_handshake directive is introduced,
which instructs nginx to reject SSL handshakes with an "unrecognized_name"
alert in a particular server block.
For example, to reject handshake with names other than example.com,
one can use the following configuration:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name example.com;
ssl_certificate example.com.crt;
ssl_certificate_key example.com.key;
}
The following configuration can be used to reject all SSL handshakes
without SNI server name provided:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name ~^;
ssl_certificate example.crt;
ssl_certificate_key example.key;
}
Additionally, the ssl_reject_handshake directive makes configuring
certificates for the default server block optional. If no certificates
are configured in the default server for a given listening socket,
certificates must be defined in all non-default server blocks with
the listening socket in question.
Similarly to ssl_conf_command, proxy_ssl_conf_command can be used to
set arbitrary OpenSSL configuration parameters as long as nginx is
compiled with OpenSSL 1.0.2 or later, when connecting to upstream
servers with SSL. Full list of available configuration commands
can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
Similarly to ssl_conf_command, proxy_ssl_conf_command (grpc_ssl_conf_command,
uwsgi_ssl_conf_command) can be used to set arbitrary OpenSSL configuration
parameters as long as nginx is compiled with OpenSSL 1.0.2 or later,
when connecting to upstream servers with SSL. Full list of available
configuration commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
With the ssl_conf_command directive it is now possible to set
arbitrary OpenSSL configuration parameters as long as nginx is compiled
with OpenSSL 1.0.2 or later. Full list of available configuration
commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
In particular, this allows configuring PrioritizeChaCha option
(ticket #1445):
ssl_conf_command Options PrioritizeChaCha;
It can be also used to configure TLSv1.3 ciphers in OpenSSL,
which fails to configure them via the SSL_CTX_set_cipher_list()
interface (ticket #1529):
ssl_conf_command Ciphersuites TLS_CHACHA20_POLY1305_SHA256;
Configuration commands are applied after nginx own configuration
for SSL, so they can be used to override anything set by nginx.
Note though that configuring OpenSSL directly with ssl_conf_command
might result in a behaviour nginx does not expect, and should be
done with care.
With this change, it is now possible to use ngx_conf_merge_ptr_value()
to merge keyval arrays. This change actually follows much earlier
changes in ngx_conf_merge_ptr_value() and ngx_conf_set_str_array_slot()
in 1452:cd586e963db0 (0.6.10) and 1701:40d004d95d88 (0.6.22).
To preserve compatibility with existing 3rd party modules, both NULL
and NGX_CONF_UNSET_PTR are accepted for now.
Previously, if there were multiple limits configured, errors in
ngx_http_complex_value() during processing of a non-first limit
resulted in reference count leak in shared memory nodes of already
processed limits. Fix is to explicity unlock relevant nodes, much
like we do when rejecting requests.
The proxy_smtp_auth directive instructs nginx to authenticate users
on backend via the AUTH command (using the PLAIN SASL mechanism),
similar to what is normally done for IMAP and POP3.
If xclient is enabled along with proxy_smtp_auth, the XCLIENT command
won't try to send the LOGIN parameter.
In 7717:e3e8b8234f05, the 1st bit was incorrectly used. It shouldn't
be used for bitmask values, as it is used by NGX_CONF_BITMASK_SET.
Additionally, special value "off" added to make it possible to clear
inherited userid_flags value.
The "false" parameter of the proxy_redirect directive is deprecated.
Warning has been emitted since c2230102df6f (0.7.54).
The "off" parameter of the proxy_redirect, proxy_cookie_domain, and
proxy_cookie_path directives tells nginx not to inherit the
configuration from the previous configuration level.
Previously, after specifying the directive with the "off" parameter,
any other directives were ignored, and syntax checking was disabled.
The syntax was enforced to allow either one directive with the "off"
parameter, or several directives with other parameters.
Also, specifying "proxy_redirect default foo" no longer works like
"proxy_redirect default".
