* Handle det == 0 in findCircle3pts.
Issue 16051 shows a case where findCircle3pts returns NaN for the
center coordinates and radius due to dividing by a determinant of 0. In
this case, the points are colinear, so the longest distance between any
2 points is the diameter of the minimum enclosing circle.
* imgproc(test): update test checks for minEnclosingCircle()
* imgproc: fix handling of special cases in minEnclosingCircle()
* Eltwise::DIV support in Halide backend
* fix typo
* remove div from generated test suite to pass CI, switching to manual test...
* ensure divisor not near to zero
* use randu
* dnn(test): update test data for Eltwise.Accuracy/DIV layer test
Add checks for empty operands in Matrix expressions that don't check properly
* Starting to add checks for empty operands in Matrix expressions that
don't check properly.
* Adding checks and delcarations for checker functions
* Fix signatures and add checks for each class of Matrix Expr operation
* Make it catch the right exception
* Don't expose helper functions to public API
* imgproc: Prevent 1B overrun of 8C3 SIMD optimization
The fourth value read via v_load_q is essentially ignored,
but can cause trouble if it happens to cross page boundaries.
The final few iterations may attempt to read the most extreme
elements of S, which will read 1B beyond the array in most
aligment cases. Dynamically compute the stop. This could be
hoised from the loop, but will require a more extensive change.
Likewise, cleanup the iteration increment statements to make
it more obvious they do channel count (3) elements per pass.
This should resolve#16137
* imgproc(resize): extra check
dnn(eltwise): fix handling of different number of channels
* dnn(test): reproducer for Eltwise layer issue from PR16063
* dnn(eltwise): rework support for inputs with different channels
* dnn(eltwise): get rid of finalize(), variableChannels
* dnn(eltwise): update input sorting by number of channels
- do not swap inputs if number of channels are same after truncation
* dnn(test): skip "shortcut" with batch size 2 on MYRIAD targets
* resize: HResizeLinear reduce duplicate work
There appears to be a 2x unroll of the HResizeLinear against k,
however the k value is only incremented by 1 during the unroll. This
results in k - 1 duplicate passes when k > 1.
Likewise, the final pass may not respect the work done by the vector
loop. Start it with the offset returned by the vector op if
implemented. Note, no vector ops are implemented today.
The performance is most noticable on a linear downscale. A set of
performance tests are added to characterize this. The performance
improvement is 10-50% depending on the scaling.
* imgproc: vectorize HResizeLinear
Performance is mostly gated by the gather operations
for x inputs.
Likewise, provide a 2x unroll against k, this reduces the
number of alpha gathers by 1/2 for larger k.
While not a 4x improvement, it still performs substantially
better under P9 for a 1.4x improvement. P8 baseline is
1.05-1.10x due to reduced VSX instruction set.
For float types, this results in a more modest
1.2x improvement.
* Update U8 processing for non-bitexact linear resize
* core: hal: vsx: improve v_load_expand_q
With a little help, we can do this quickly without gprs on
all VSX enabled targets.
* resize: Fix cn == 3 step per feedback
Per feedback, ensure we don't overrun. This was caught via the
failure observed in Test_TensorFlow.inception_accuracy.
Test create custom layer in python
* check is contiguos
* Add custom layer test
* Fix test
* Remove assert
* Move assert to pyopencv dnn
* remove assert
* Add unregister
* Fix python2
* proto to bytearray
* Fix data type
* calib3d: use normalized input in solvePnPGeneric()
* calib3d: java regression test for solvePnPGeneric
* calib3d: python regression test for solvePnPGeneric
* core: disable invalid constructors in C API by default
- C API objects will lose their default initializers through constructors
* samples: stop using of C API
(1/4) Revert "Correct image borders and principal point computation in cv::stereoRectify"
This reverts commit 93ff1fb2f2.
(2/4) Revert "fix calib3d changes in 6836 plus some others"
This reverts commit fa42a1cfc2.
(3/4) Revert "fix compiler warning"
This reverts commit b3d55489d3.
(4/4) Revert "add test for 6836"
This reverts commit d06b8c4ea9.
Tests for argument conversion of Python bindings generator
* Tests for parsing elemental types from Python bindings
- Add positive and negative tests for int, float, double, size_t,
const char*, bool.
- Tests with wrong conversion behavior are skipped.
* Move implicit conversion of bool to integer/floating types to wrong
conversion behavior.
* Fix infinite loop when trying to change state of the busy camera
- Add finite number of attempts in tryIoctl functions
10 by default.
* Introduced new flag for ioctl call to handle EBUSY
Improving VSX performance of integral function
* Adding support for vector get function on VSX datatypes so the
integral function gains a bit of performance.
* Removing get as a datatype member function and implementing a new HAL
instruction v_extract_n to get the n-th element of a vector register.
* Adding SSE/NEON/AVX intrinsics.
* Implement new HAL instruction v_broadcast_element on VSX/AVX/NEON/SSE.
* core(simd): add tests for v_extract_n/v_broadcast_element
- updated docs
- commented out code to repair compilation
- added WASM and MSA default implementations
* core(simd): fix compilation
- x86: avoid _mm256_extract_epi64/32/16/8 with MSVS 2015
- x86: _mm_extract_epi64 is 64-bit only
* cleanup
Supported ONNX Squeeze, ReduceL2 and Eltwise::DIV
* Support eltwise div
* Fix test
* OpenCL support added
* refactoring
* fix code style
* Only squeeze with axes supported
* Convert moments in tile algorithms to HAL (1.3x faster for VSX).
* Adding NEON code back in for non 64-bit platforms.
* Remove floats from post processing.
Clarify stereoRectify() doc
The function stereoRectify() takes as input a coordinate transform between two cameras. It is ambiguous how it goes. I clarified that it goes from the second camera to the first.
* Use FlsAlloc/FlsFree/FlsGetValue/FlsSetValue instead of TlsAlloc/TlsFree/TlsGetValue/TlsSetValue to implment TLS value cleanup when thread has been terminated on Windows Vista and above
* Fix 32-bit build
* Fixed calling convention of cleanup callback
* WINAPI changed to NTAPI
* Use proper guard macro
* Vectorize flipHoriz and flipVert functions.
* Change v_load_mirror_1 to use vec_revb for VSX
* Only use vec_revb in ISA3.0
* Removing vec_revb code since some of the older compilers don't fully support it.
* Use new v_reverse intrinsic and cleanup code.
* Ensure there are no alignment issues with copies
* Doc bugfix
The documentation page StereoBinaryBM and StereoBinarySGBM says that it returns a disparity that is scaled multiplied by 16. This scaling must be undone before calling reprojectImageTo3D, otherwise the results are wrong. The function reprojectImageTo3D() could do this scaling internally, maybe, but at least the documentation must explain that this has to be done.
* calib3d: update reprojectImageTo3D documentation
* calib3d: add StereoBM/StereoSGBM into notes list
- move TLS & instrumentation code out of core/utility.hpp
- (*) TLSData lost .gather() method (to dispose thread data on thread termination)
- use TLSDataAccumulator for reliable collecting of thread data
- prefer using of .detachData() + .cleanupDetachedData() instead of .gather() method
(*) API is broken: replace TLSData => TLSDataAccumulator if gather required
(objects disposal on threads termination is not available in accumulator mode)
Fixing bug with comparison of v_int64x2 or v_uint64x2
* Casting v_uint64x2 to v_float64x2 and comparing does NOT work in all cases. Rewrite using epi64 instructions - faster too.
* Fix bad merge.
* Fix equal comparsion for non-SSE4.1. Add test cases for v_int64x2 comparisons.
* Try to fix merge conflict.
* Only test v_int64x2 comparisons if CV_SIMD_64F
* Fix compiler warning.
* New v_reverse HAL intrinsic for reversing the ordering of a vector
* Fix conflict.
* Try to resolve conflict again.
* Try one more time.
* Add _MM_SHUFFLE. Remove non-vectorize code in SSE2. Fix copy and paste issue with NEON.
* Change v_uint16x8 SSE2 version to use shuffles
* Adding support for vectorized masking for uchar/ushort.
* Fixing bug where mask was zeroing the dst. Improved the way to calculate
the mask and tweaked for further performance improvements.
* Fixing mask comparison test.
* Restricting to one channel.
* Adding support for 3 channels, switch old approach to start using HAL's
v_select.
* Cuda + OpenGL on ARM
There might be multiple ways of getting OpenCV compile on Tegra (NVIDIA Jetson) platform, but mainly they modify CUDA(8,9,10...) source code, this one fixes it for all installations.
( https://devtalk.nvidia.com/default/topic/1007290/jetson-tx2/building-opencv-with-opengl-support-/post/5141945/#5141945 et al.).
This way is exactly the same as the one proposed but the code change happens in OpenCV.
* Updated,
The link provided mentions: cuda8 + 9, I have cuda 10 + 10.1 (and can confirm it is still defined this way).
NVIDIA is probably using some other "secret" backend with Jetson.
* core: rework and optimize SIMD implementation of dotProd
- add new universal intrinsics v_dotprod[int32], v_dotprod_expand[u&int8, u&int16, int32], v_cvt_f64(int64)
- add a boolean param for all v_dotprod&_expand intrinsics that change the behavior of addition order between
pairs in some platforms in order to reach the maximum optimization when the sum among all lanes is what only matters
- fix clang build on ppc64le
- support wide universal intrinsics for dotProd_32s
- remove raw SIMD and activate universal intrinsics for dotProd_8
- implement SIMD optimization for dotProd_s16&u16
- extend performance test data types of dotprod
- fix GCC VSX workaround of vec_mule and vec_mulo (in little-endian it must be swapped)
- optimize v_mul_expand(int32) on VSX
* core: remove boolean param from v_dotprod&_expand and implement v_dotprod_fast&v_dotprod_expand_fast
this changes made depend on "terfendail" review
- renamed Cascade Lake AVX512_CEL => AVX512_CLX (align with Intel SDE tool)
- fixed CLX instruction sets (no IFMA/VBMI)
- added flag to bypass CPU baseline check: OPENCV_SKIP_CPU_BASELINE_CHECK
[GSoC 2019] Improve the performance of JavaScript version of OpenCV (OpenCV.js)
* [GSoC 2019]
Improve the performance of JavaScript version of OpenCV (OpenCV.js):
1. Create the base of OpenCV.js performance test:
This perf test is based on benchmark.js(https://benchmarkjs.com). And first add `cvtColor`, `Resize`, `Threshold` into it.
2. Optimize the OpenCV.js performance by WASM threads:
This optimization is based on Web Worker API and SharedArrayBuffer, so it can be only used in browser.
3. Optimize the OpenCV.js performance by WASM SIMD:
Add WASM SIMD backend for OpenCV Universal Intrinsics. It's experimental as WASM SIMD is still in development.
* [GSoC2019]
1. use short license header
2. fix documentation node issue
3. remove the unused `hasSIMD128()` api
* [GSoC2019]
1. fix emscripten define
2. use fallback function for f16
* [GSoC2019]
Fix rebase issue
* Added MSA implementations for mips platforms. Intrinsics for MSA and build scripts for MIPS platforms are added.
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* Removed some unused code in mips.toolchain.cmake.
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* Added comments for mips toolchain configuration and disabled compiling warnings for libpng.
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* Fixed the build error of unsupported opcode 'pause' when mips isa_rev is less than 2.
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* 1. Removed FP16 related item in MSA option defines in OpenCVCompilerOptimizations.cmake.
2. Use CV_CPU_COMPILE_MSA instead of __mips_msa for MSA feature check in cv_cpu_dispatch.h.
3. Removed hasSIMD128() in intrin_msa.hpp.
4. Define CPU_MSA as 150.
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* 1. Removed unnecessary CV_SIMD128_64F guarding in intrin_msa.hpp.
2. Removed unnecessary CV_MSA related code block in dotProd_8u().
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* 1. Defined CPU_MSA_FLAGS_ON as "-mmsa".
2. Removed CV_SIMD128_64F guardings in intrin_msa.hpp.
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* Removed unused msa_mlal_u16() and msa_mlal_s16 from msa_macros.h.
Signed-off-by: Fei Wu <fwu@wavecomp.com>
* issue 5769 fixed: cv::stereoRectify fails if given inliers mask of type vector<uchar>
* issue5769 fix using reshape and add regression test
* regression test with outlier detection, testing vector and mat data
* Size comparision of wrong vector within CV_Assert in regression test corrected
* cleanup test code
ISA 2.07 (aka POWER8) effectively extended the expanding multiply
operation to word types. The altivec intrinsics prior to gcc 8 did
not get the update.
Workaround this deficiency similar to other fixes.
This was exposed by commit 33fb253a66
which leverages the int -> dword expanding multiply.
This fixes Issue #15506
* Adding all possible data type interactions to the perf tests since some
use SIMD acceleration and others do not.
* Disabling full tests by default.
* Giving proper names, removing magic numbers and sanity checks of new
performance tests for the integral function.
* Giving proper names, making array static.
* Convert ImgWarp from SSE SIMD to HAL - 2.8x faster on Power (VSX) and 15% speedup on x86
* Change compile flag from CV_SIMD128 to CV_SIMD128_64F for use of v_float64x2 type
* Changing WarpPerspectiveLine from class functions and dispatching to static functions.
* Re-add dynamic runtime and dispatch execution.
* RRestore SSE4_1 optimizations inside opt_SSE4_1 namespace
